Rockler Dust Right 4'' Quick Release Starter Kit

Dust Right 4" Quick Release Starter KitMove dust collection from one tool to the next like never before! One end of the 4" Dust Right Tool Port connects tightly to any tool with a 4" dust port, while the other end fits perfectly into the Dust Right Handle (which connects to 4" hose and, ultimately, your dust collector), allowing you to move dust collection to right where you need it. The ports feature a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Includes two 4" Dust Right Tool Ports with two metal hose clamps Dust Right Handle

$21.99
Buy
 

Related Products

Triton 3-1/4 HP Dual-Mode Plunge Router

Triton 3-1/4 HP Dual-Mode Plunge Router
$249.99

With its awesome power and suite of unique, user-friendly adjustments, the Triton TRA001 Dual-Mode Plunge Router more than deserves the praise it's been getting. Depth adjustments are a breeze with the unique "winder handle" - just squeeze the router's handle and turn to raise or lower, then use the micro-adjustment knob to dial in the final setting. You can also turn a dial to use the standard free-plunge adjustment. A turret system allows you to dial in two preset settings. Soft-start variable speed motor provides smooth, even power regardless of load. Bit changes are easy, one-wrench affairs - the spindle lock automatically engages when the spindle is extended past the faceplate - no more skinned knuckles juggling two wrenches inside the base. Whether in fixed mode or plunge mode, table-mounted or freehand, the Triton Dual-Mode Plunge Router will be a pleasure to use. It even includes a multi-function fence that serves as an edge guide, a circle cutter, and an oversized base.Technical Details:2400 watts, 3-1/4 HP.Variable speed range: 8000-21000 RPM.Includes multi-function fence and 1/2" collet with a 1/4" reducer. Automatic spindle lock only engages when power switch safety cover is closed. Multi-function fence mounts easily with quick-fit pins. Side-mounted cooling vents keep sawdust away from motor housing when router is mounted in a router table. Removable height-winder handle allows above table depth adjustments. Removable plunge tension spring makes bit adjustments easy when the Triton TRA001 is table mounted. Worn brushes are easily accessible. Single spanner 'above table' router bits changes. Fully enclosed plastic shielding provides maximum protection from chips, and aids in dust collection.

Powermatic PM1300TX-CK Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit

Powermatic PM1300TX-CK Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit
$849.99

The PM1300TX Dust Collector features the exclusive TurboCone which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility. Features:TurboCone improves chip separation and collector bag packing efficiencyThe cone eliminates premature filter clogging for sustained performanceRemote-controlled digital timer can be programmed for up to 99 minutesCanister filter offers over six times filtering surface area of standard bagsAll-metal duct construction for rigidity and improved air flowDual 4" dust ports for simultaneous collection from two machines1-3/4HP motor offers plenty of power for effective air movementCollection bag uses a snap ring for rapid installation and removal10 cubic feet capacity collection bag reduces number of bag changesFour swivel casters for easy maneuverability

Jet 6'' x 48'' Belt and 12'' Disc Sander Combo w/Closed Stand

Jet 6'' x 48'' Belt and 12'' Disc Sander Combo w/Closed Stand
$1,491.00

The JET JSG-6CS Sander combines a 12" disc and a 6" x 48" belt to provide raw industrial 1.5 HP sanding power. The exclusive dual thumbscrew belt tracking adjustment locks to keep the belt on track while tackling any tough application. The sander boasts both a quick release belt tension lever and a quick lock dust cover for the disc. The built in handle allows for easy portability around the workshop while the included stand saves room on your workbench.Features:Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use Graphite covered steel platen runs cooler increasing machine and belt life Specially designed belt guard allows full use of the 6" belt width and length Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage Tracking adjustment knob with quick-lock handle keeps belt on track during use Quick-release belt tension lever makes belt changes fast and easy Quick-lock dust cover allows fast disc changes Single 4" dust port on the back of the base collects dust effectively from both the belt and disc Powerful 1-1/2HP motor easily handles the toughest sanding operations Built-in handles for easier portability One-piece formed steel heavy-duty closed stand with built-in casters provides solid support and portabilityStandard Equipment:Back stop for horizontal mode Mitre gauge Sanding belt Sanding disc 4" dust chuteOptional Equipment:Open stand, 26"H x 15"D x 19-1/2"W (Stock No. 708566) Closed stand (Stock No. 708598) Sanding belts and discs