Rockler Through-The-Wall Dust Right Port Kit

Here's a great way to access your dust collector while keeping it in a sound insulated storage area! Includes a pair of Dust Right Combo ports and a 4" x 12" pipe that lets you connect a dust collection line from one room to another. Stepped fittings for the Dust Right Handle or standard 4" hose Trim-to-size 4" x 12" pipe gives you enough length to get through any wall

$16.99
Buy
 

Related Products

iVac Pro 4'' Blast Gate Starter Pack

iVac Pro 4'' Blast Gate Starter Pack
$239.99

This electronically driven automatic blast gate system is an optional upgrade to the iVac Pro Wireless Dust Collection Control System, bringing one-touch simplicity to managing your dust collection airflow. Simply turn on your power tool, and the iVac Pro Tool (42891, sold separately) sends a wireless signal to automatically open the corresponding Pro Blast Gate, and another signal to the iVac Pro Switch (42897, sold separately), which turns on your dust collector. Turn off your power tool, and after a short interval to clear dust, the blast gate closes and the dust collector powers down. This automation prevents the irritating dust clouds that result from forgetting to open a blast gate, and the reduced suction that results from forgetting to close it afterward. The system also ensures that at least one gate stays open when the vacuum is on to prevent overloading the motor on your dust collector. Prevents the irritating dust clouds you get from forgetting to open the blast gateReduces the potential for accidents from reaching for blast gates while machines are runningOptimizes the suction in your system by keeping a minimum number of gates open at one timeBlast gates can also be controlled via the handheld wireless remote or manually with the toggle switchKit includes two blast gates for 4'' hose, two 115v AC adapters, a wireless remote control and a manual toggle switchUp to eight blast gates can operate on one systemAdditional blast gates available separately (52504)RF range: 40'

FastWrap

FastWrap
$11.59

Wrap up loose cords, hoses and other potential shop hazards and secure them in a safe and organized manner. Hook and loop helps keep extension and tool cords,dust collection hoses and more stored neatly and out of your way. Durable material withstands repeated use. 1/2" wide. 10' roll.

Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit

Leigh D4R Pro 24" Dovetail Jig w/Accessory Kit
$819.00

Create the look of hand-cut dovetails on stock up to 24" wide with your router and the Leigh D4R Pro Dovetail Jig '' plus get great dust collection and 12 additional router bits with the AC D24 Accessory Kit! The D4R features adjustable guide fingers, freeing you from the need to dimension your workpiece to suit the jig and providing infinite options for pin and tail width and spacing. Whatever the width of your stock, you can get a half-pin on the top and the bottom and custom spacing in between, meaning that you're never limited to repetitive, obviously machine-made joints. The D4R can handle boards up to 24" wide and 1-1/4" thick and comes with three cutters, cam-action speed clamps, crosscut bar, angled side stop, screwdriver, all mounting hardware, 160-page user guide and instructional DVD. Router with a 1/2" collet required. The accessory kit includes the (VRS) vacuum and router support, for full-width router support and dust-free routing, as well as a 12 piece Leigh bit set. What's Included:Leigh D4R Dovetail Jig 1/2" x 8° and 1/2" x 14° dovetail cutters (8mm shanks) 5/16" x 1" straight cutter (8mm shank) 1/2" to 8mm collet reducer 7/16" O.D. guide bushing 160-page manual Instructional DVD Vacuum and router support (VRS) 1/4", 5/16", 3/8", 7/16", 11/16", 13/16" x 8 degree dovetail bits 7/16" x 1-1/4" CL straight, 1/2" x 1-1/4" CL straight bits 1/2" x 10 degree, 12 degree, and 18 degree dovetail bits 1/2" and 8mm shank bits, 1/2" to 8mm collet reducer