Nut and Washer Hardware Variety Pack, 235-Pack

Includes an assortment of nuts and flat washers for a variety of projects in the shop or around the house. Nuts come in a range of sizes, both with and without the nylon locking insert.Technical Details:Locking nuts have a nylon inserting to prevent loosening over time.All included hardware is zinc plated.Includes divided carrying case.

$8.99
Buy
 

Related Products

Rockler Pock-it Hole Clamp with Quick Release

Rockler Pock-it Hole Clamp with Quick Release
$21.99

The Pock-it Hole Clamp with a new Quick Release features a unique design that inserts a built-in adjustable pin into a 3/8" x 15° pocket hole, giving you perfect alignment every time. Now setups are even quicker and easier with the new quick-release slide button to snug up your fit, then use the ratcheting handle for final tightening. The clamp has all the clearance you need to clamp and fasten double joints in one easy step. Simply clamp the joint using one hole, then insert a screw in the other hole and tighten. Works perfectly with 3/8" pocket holes on 3/4" thick face frames and casework, and stock up to 3" wide.Unique design allows easy clamping and surface alignment of pocket hole jointsThe adjustable pin fits in a 3/8" x 15° pocket hole while the clamp tightens the joint Works in 3/8" pocket holes on 3/4" thick face frames and caseworkClearance in the clamp body enables clamping and fastening of double joints in one easy step Ratcheting handle allows for clamping face frames flat on the workbenchTighten or release the handle quickly and easily using the new quick-release slide button 3" wide stock capacity

Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter

Full Circle 2 Shelf Lazy Susan, Rev-a-Shelf 6012 Series-18" Diameter
$46.99

The 6012 Series by Rev-a-Shelf is a two shelf Full Circle System with dependently rotating shelves, available in 18" diameter. These polymer full circle sets feature a ¾" zinc diameter shaft system for absolute durability and a telescoping shaft accommodating heights from 26"-32". Shelves are available in white or almond color.Polymer 2-Shelf Set with telescoping shaftAccommodates 26"-32" inner cabinet heightsDependently rotating hardwareLimited Lifetime WarrantyTechnical DetailsAvailable in 18" diameterAvailable in White or AlmondDependently rotating shelvesFeatures 3/4" zinc diameter shaft system for absolute durabilityThe 6012 (2 shelves)units feature a telescoping shaft accommodating heights from 24" - 31"Made of durable polymer6000 SERIES FULL CIRCLE REV-A-SHELF SYSTEM WITH TELESCOPING PIVOT HARDWARE Locate the bottom pivot by placing one of the shelves on the base of the cabinet and marking through the center hole making sure the shelf will have at least 3/8 in. side clearance all around. Pilot drill (1/8 in. dia.) holes and fasten the bottom pivot with four (4)1/2" x #8 truss head wood screws. Slide the collar assembly over the center shaft and start the screw into the hole in the center shaft. Insert the upper shaft assembly all the way into the center shaft. Set the shaft assembly on the bottom pivot and extend the upper shaft to the top of the cabinet. Plumb with level to locate the center for the top pivot bracket. Pilot drill (1/8" in. dia.) holes and fasten the top pivot with four (4) 1/2 in. x #8 truss head wood screws. You are now ready to assemble the unit inside the cabinet. Place the shelves inside the cabinet over the bottom pivot bracket and slide the shaft assembly through the shelves. Lift the shaft assembly and engage it in the bottom pivot, whie holding the shelves up with one hand. Extend the upper shaft assembly and engage it in the top pivot bracket and tighten the locking screw on the collar assembly securely. Adjust the shelves to the desired heights and tighten the shelf locking screws securely. NOTE: A little lubricant (white grease or equivalent) applied to the top and bottom pivot will insure quiet and smooth turning.

Multi Track for Jigs and Custom Fences-Multi Track

Multi Track for Jigs and Custom Fences-Multi Track
$24.99

With Universal T-Tracks on every face, these 36" tracks are full of potential - use them to create custom fences, jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1/4" and 3" heights. Multi Track Brackets and Flip Stops sold separately.Technical Details:Universal T-tracks accept all three major accessory fasteners: 1/4" T-bolts, 1/4" Hex Bolts and 5/16" T-boltsSolid extruded aluminum construction for strength and durability3/4" ThickT-tracks are spaced 3/4" apart (on center) for simple assembly and optimal utility