This cylinder lock is ideal for locking drawers as well as both left- and right-hand doors. Designed for use with 3/4" thick stock, each lock is keyed alike. Includes two cams: one for lipped door applications and one for inset and overlay applications. Use the included dual-function stop washers to set the lock for either a 90 degree or 180 degree cam turn. The cylinder lock has a five disc tumbler and is available in a nickel, antique brass, or brass finish.Technical DetailsAvailable in nickel, antique brass, or brass finishTwo cams for straight or lipped edges includedTwo keys and all mounting hardware includedUse with 3/4" thick stockRequires 3/4" through holeSee Tech Document (below) for detailed dimensions
The Paasche Talon - or TS - Airbrush Kit represents the ultimate in fine airbrush detail, as well as versatility, creating narrow lines down to 1/64" wide and patterns up to 3" wide with the optional fan head (sold separately). The Talon Airbrush can handle light, medium and heavy fluids and features a double-action trigger for one-handed operation push down to control the air flow and pull back to control the paint flow. It comes with a 0.66mm nickel silver tip installed and 0.38mm tip, needle and aircap in the box. Because it's an internal-mix airbrush, it produces a very fine spray. Additional color cups, bottles, tips and other accessories are available for replacements or for expanding your kit. Anodized aluminum handle. The TS Airbrush is 100% Made in the USA.Minimum $20 order for Paasche direct ship items.Technical Details:"Double-action airbrush" refers to the method used to control the spray pattern. Pressing down on the button regulates the amount of air flow, and pulling back determines the amount of fluid released. This allows the user to change the width of line, color and the opaqueness of color with one hand. Double-action models take more practice to use but are better for freehand detail work.Use the 0.38mm head for finer detail down to a hair line and the 0.25mm for even finer detail.Use the optional TAF-3 Fan Aircap (sold below 45810) with the 0.66mm head for 2-1/2" to 3" flat patterns.The Paasche TS Airbrush features a bottom mount siphon feed, making it suitable for both left- and right-handed users.The TS is an internal-mix airbrush, meaning that air and paint are mixed inside the airbrush, producing a fine spray.Most shop compressors can be used for airbrushing simply dial down the pressure.Specialized compact Airbrush Compressors are also available separately (see 46309, 46705, and 47379).Clean, dry air is essential for best results.Airbrush Cleaning Kit (44559) sold separately for maintaining your airbrushes.PTFE packing enables the MIL to handle any water or solvent based paint.To clean needles, simply spray paint cleaner though the airbrush and wipe off the needle.
Smooth, round edges form a flowing profile pattern and give your room a classic look. High-quality kiln-dried wood will match with Redmond Crown Molding, Chair Rail and Casing (all sold separately) to preserve a consistent and beautiful theme. 5-1/4" height offers standard wall protection and a decorative accent to give a finished look to any room. 1/2" thick. Unfinished. Available only in 6', 7' and 8' lengths.There is a $10 extra shipping charge per order.
Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.