1-3/4" Embossed Carvings-Select Option

These quality carvings come ready to finish. Choose from Birch or Oak. Measures 1-3/4" in diameter.

$4.99
Buy
 

Related Products

Designer Valet Rod, Oil Rubbed Bronze, Metal (CVR-14-ORB)

Designer Valet Rod, Oil Rubbed Bronze, Metal (CVR-14-ORB)
$15.99

A large selection of valet rods in many styles and finishes.Our designer series valet rods feature a sleek mounting post design with telescoping rod and are available in several finishes.CVR-14-ORB Dimensions: 1.25-0"W x 1-0"H x 13.875-21.875"D Patent Pending .

General Finishes Argentine Pearl Effects

General Finishes Argentine Pearl Effects
$39.99

Use General Finishes Pearl Effects in combination with other finishes to create a unique metallic look with depth and shimmer. Pearl Effects may be applied over General Finishes Milk Paints, stains and water-based topcoats to create translucent metallic effects. Available in a range of decorative pearlescent colors. The resulting effect will vary greatly depending on what the Pearl Effects are combined with. The color swatch shown is an example combined with either a milk paint or a stain along with a topcoat of General Finishes High Performance Flat.Features:Water-based acrylic base for easy clean-upMay be applied with a foam brush, bristle brush, pad applicator or sprayNote: Always test for compatibility when using this product with other brandsSample ShownPearl Effects are semi-transparent glazes designed to add a special visual effect to your project. The sample shown was achieved by applying the following: Snow White Milk Paint Argentine Pearl Effects

Robert Sorby Parting Tools

Robert Sorby Parting Tools
$54.49

Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets.Diamond Parting Tool - The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby lessening the chance of burning the bottom of the parted project.