These quality carvings come ready to finish. Measures 2-1/8" square.
This is the ultimate formula for removing minor imperfections in the finish and creating a professional, high-gloss, "wet" polish. It can be used either by hand or with a mechanical buffer on almost any fully cured finish. Offered in the original (#5) grade for excellent gloss and quick results. Pint.Note: This product is not available in the Pasadena, Torrance Orange and Ontario stores due to AQMD VOC requirementsDesigned to replace the traditional "tripoli and oil" final rub on gloss finishes.Contains no silicones or waxes that could interfere with additional finish coats, touch-up or refinishing.May be applied with a soft cloth, felt rubbing block or a low-speed electric buffer.Please note that this item can be shipped only by UPS Ground to addresses within the continental United States.
This stain features the low-odor and easy cleanup of water-based stains, while emulating the easy spreading, blending, repairability and generous open times of oil-based stains. The blend of high-quality dyes and pigments provides rich, even color, and the heavier bodied formula allows controlled penetration, reducing blotching on hard-to-stain woods such as Aspen, Pine and Maple. Non-flammable and free of harsh chemicals and toxic vapors. Ideal for use with children's toys and furniture.Apply liberally with a foam brush or a paint pad applicator.Dry time is normally 1-2 hours under ideal conditions (70°F, 70% humidity).Cooler temperatures/higher humidity will prolong dry time up to 8-10 hours.If necessary, thin with 10-20% water.Coverage: 150 sq. ft. per quart.Note:Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.
This solid carbide cutter was sharpened on a diamond wheel to 1500 grit, and can be rotated to give you a fresh edge in only seconds! Use it with the Full Size Round Carbide Turning Tool (48723, sold separately) to get smooth finishes on curved, concave surfaces.Features:R2 replacement cutter measures approximately 0.60'' in diameter.Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.Cutter rotates, giving you numerous fresh edges with no need for sharpening.Sharpened on a diamond wheel to 1500 grit.Solid carbide stays sharper for longer, when compared with steel.