Ideal for 1/4" by-passing glass doors. Made of high impact extruded polystyrene, this track is made especially for small, lightweight bypassing doors. Includes durable upper and lower tracks. Upper track is 9/16" high, 7/8" wide, 48" longLower track is 5/16" high, 7/8" wide, 48" longCan be cut to sizeComes in Walnut or Black finish
The generous dimensions of these shimmering iridescent blanks make them ideal for our Stainless Steel Ice Cream Scoop Hardware Kit (#34360, sold separately), and our Pizza Cutter Blade Kit (#34913, sold separately). They also make great tool handles and turning stock for other projects wider than a pen blank.Features: Blanks can be finished after turning by sanding to a fine grit and then polishing on a buffing wheel with Corian polish, buffing compound or Hut finishing blocks.
Make turning a little easier and a lot more fun with Crowns exclusive Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge! This gouge is the "elite' of all turning gouges. Made from an advanced Powder Metal, the molten steel has been compressed and sintered giving this Pro-PM turning tool a cutting edge which lasts up to four/five times that of a conventional High Speed Steel tool. The chisel is hardened to between 66° and 68° Rockwell, enabling it to have a vastly superior wear resistance, excellent grinability, superior toughness, a high working hardness and a high retention of hardness. The ergonomically designed stained black ash handle makes the finished chisel unbeatable.Technical Details:From Crowns exclusive Pro-PM Powder Metallurgy High Speed Steel tool lineMade from an advanced Powder MetalMolten steel is compressed and sintered giving this Pro-PM turning tool a cutting edge which lasts up to four/five times that of a conventional High Speed Steel toolChisel is hardened to between 66° and 68° Rockwell, enabling it to have a vastly superior wear resistance, excellent grinability, superior toughness, a high working hardness and a high retention of hardnessErgonomically designed stained black ash handle
Created in England more than 100 years ago, Liberon's paste wax has come to be regarded as one of the finest available. Use as a protective finish over bare wood and to create an extra barrier against damage from water, heat and alcohol on finished furniture. Available in a variety of colors.A blend of paraffin, microcrystalline and carnauba mixed with the highest quality mineral spirits available gives Liberon Fine Paste Wax its pleasing aroma.Can be used directly on bare wood as a finish and is often found on Oak or Pine country style furniture where the timber needs feeding.Use over french polish, varnish or oil finishes to create a protective barrier.All colors consist of finely ground natural earth pigments.Best application is with the Liberon 4/0 steel wool pad - a thin coat is best. Buff within 20 minutes of the application.Clean up or dissolve with mineral spirits.The pin hole in the top of each can allows for easy on/off of the lid.Easy to repair - simply rewax the affected area!Toluene free.Non-toxic. Safe for toys!500ml container.Choose from:Neutral- water clear, no pigment, just a protecting coatClear- light hint of amber, adds "warmth"Antique Pine- light, gentle brownWalnut- deep, medium brownGeorgian Mahogany- chocolate brownVictorian Mahogany- burgundy colorMedium Mahogany- a reddish brownMedium Oak- medium toned brownDark Oak- rich, dark brownTudor Oak - the darkest brown, close to black, also considered a Jacobean finish. Ideal to capture that "Arts & Crafts" look.