Create a distinctive look with Stainless Steel Tubing! Perfect for hand railings, stair railing, and bar railing, each tube is hand polished to a mirror-like finish and fits with any decor. Comes in your choice of 1-1/2" or 2" diameter solid stainless steel tubing. Tubes come in 6' lengths.Technical DetailsCreates a distinctive look in any settingIdeal for hand railings, stair railings, bar railings, and moreHand-polished to a mirror-like finishYour choice of 1-1/2" or 2" diameter tubingAll tubing has a 0.050" thickness
Micro-Mesh is used to polish surfaces back to clarity or a high gloss. Available in grades 1500-12,000.Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss. Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH. Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000
For use with the TrueCoat Pro Fine Finish Sprayer only (44853, sold separately). Graco Fine Finish tips are a uniquely designed tip and guard combination that is optimized for use with the TrueCoat Pro Fine Finish sprayer. Their pre-orifice tips provide finer atomization, resulting in a better finish. RAC tips have two positions: when the lever is pointed forward, the tip is in the spray position, when pointed backwards, it is in the unclog position. TrueCoat Fine Finish Tips are available in a variety of sizes and fan widths, covering all of your fine finish needs. Use with all fine finish materials including "hot" solvents.Technical Details:For use with the TrueCoat Pro Fine Finish Sprayer only (44853, sold separately).Reversible design makes it easy to clear clogs.308 tip is for thin stains, has a 6" fan width, and a 0.008" orifice.310 tip is for medium lacquers and clear finishes, has a 10" fan width, and a 0.010" orifice.412 tip is for heavy enamels, has an 8" fan width, and a 0.012" orifice.To determine the width of the spray pattern for any given Graco tip, multiply the first digit of the tip # by 2. So the 515 tip will have a 10" fan width when sprayed 12" from the surface. The 308 tip will have a 6" fan width.The 2nd and 3rd digits of the tip # represent the size of the orifice in thousandths of an inch. So the 515 tip has a 0.015" orifice. The 308 tip has a 0.008" orifice.With use, paint sprayer tips will gradually wear out, and you will see the fan pattern become narrower. Replace worn tips when fan width is reduced by 25% to minimize material waste and maintain an even spray pattern.
A light, delicate design - a great way to pull it all together. Each piece is precisely shaped, sanded and ready for finishing.