Allwood Two Ply Veneer-New! 24 Inch x 32 Inch

Our premium two ply veneers are now available in convenient 24" x 32" x 1/29'' thick. These 32" lengths are great for doors, face frames, and end panels on vanities as well as on standard base cabinets with a toe space. They come in White Ash, White Birch, Cherry, Maple, Honduran Mahogany, Red Oak, Walnut and White Oak.These two-ply veneers couple premium-grade face veneers with a second ply of the same or similar species for superior flexibility and the rich look of solid wood without the "black line." A bit thicker than many veneers, these have a more luxurious appearance, no telegraphing and checking, and are very easy to work with. They are pre-sanded, so you can apply and finish with minimal clean-up.Additional Features:Unfinished real woodPre-sandedAccepts stains and finishes

$24.99
Buy
 

Related Products

Card Holders with Pulls

Card Holders with Pulls
$1.99

Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes. Includes screws. Sold singly. Made in USA.Technical Details:Cardholder measures 2-7/16"W x 1-5/16"H overall.Card Size: 1-3/4"W x 1-1/8"H.Projection from surface: 11/16". Card slot window is 1-5/8" wide. Plated finish. Made in USA.

Cherry by the Piece-3/4" Thickness

Cherry by the Piece-3/4" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Bell Bun Feet

Bell Bun Feet
$24.99

Give your project a truly finished look with our bun feet.Available in two wood species.Feet measure 4-1/4" high x 3-7/8" overall diameter.Measurements:height: 4-1/4"width: 3-7/8"top: 2-5/8"