Behlen Guitar Toners are used to add controllable, even color to your guitar. Made from fade resistant dyes, they apply transparent color so the beauty of the wood shows through, yet they are strong enough that a few coats will create pleasing, even color. Encore Brown is used to create a sunburst or starburst effect, or to tone the sides of an acoustic guitar darker. Often it is used at the edge, while Starcast Amber (44984, sold separately) is sprayed over the Encore Brown, but in a wider pattern, to create a two-toned starburst. Typically, Vinyl Sealer (48345, sold separately) is applied before the toners, and Stringed Instrument Lacquer (48954, sold separately) is applied after the toners to create a professional finish. Also available from Rockler, the Behlen Sunburst Guitar Finish Kit.
Make your joinery and edge profiles look equally sharp with this 9-Piece Basic Router Bit Set from Freud. With a dovetail bit, three straight bits and a rabbeting bit, you'll have the capability of cutting a full suite of high-quality joints. Use the flush trim bit to trim any veneers, laminates or thin stock glue joints before sanding. Once your project is together, the ogee, round over and V-groove bits will help you dress it up for beautiful final results. The set includes a beautiful wall-mountable wooden case with a hinged door that keeps your bits protected and well-organized.Includes a variety of bits for joinery and decorative effects.Set comes in Freud's unique shadow box case, which hangs on the wall or mounts on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.Features TiCo Hi-Density carbide for longer bit life and a flawless finish.Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion.Each bit is computer-balanced and precision-ground for the smoothest possible cuts.1/2" Double Flute Straight Bit:Freud #: 12-116Overall Diameter (A): 1/2"Carbide Height (B): 1"Shank (C): 1/2"Overall Height: 2-5/8"3/8" Double Flute Straight Bit:Freud #: 12-108Overall Diameter (A): 3/8"Carbide Height (B): 1"Shank (C): 1/2"Overall Height: 2-5/8"1/2" Mortising Bit:Freud #: 16-110Overall Diameter (A): 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-3/8"1/2" Dovetail Bit:Freud #: 22-112Overall Diameter (A): 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"Rabbeting Bit:Freud #: 32-102Overall Diameter (A): 1-1/4"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"Rounding Over Bit:Freud #: 34-120Overall Diameter (A): 1"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/2"Roman Ogee Bit:Freud #: 38-106Overall Diameter (A): 1-3/8"Bearing Diameter: 3/8"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-3/8"Bearing Flush Trim Bit:Freud #: 42-109Overall Diameter (A): 1/2"Bearing Diameter: 1/2"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-7/8"V" Grooving Bit:Freud #: 20-108Overall Diameter (A): 3/4"Carbide Height (B): 1/2"Shank (C): 1/2"Overall Height: 2-1/4"
Chakte Viga ranges in color from a striking orange-red to a golden brown, and darkens with time. Despite its density, it is quite easy to work with sharp tools. Chakte Viga features a beautiful natural luster, and is often markedly iridescent once finished. Closely related to Brazilwood (used for violin bows), Chakte Viga has similarly excellent acoustic properties.Technical Details:Chakte Viga: (Mexican Pernambuco) Caesalpinia platylobaNative to: Mexico and Central America.Hardness: Chakte Viga is very hard; about twice as hard as white oak.Grain/Texture: Fine, even texture. Natural luster.Rot Resistance: Extremely rot-resistant. Sometimes used as fence post material.Workability: Machines well with sharp equipment. Occasional interlocking grain can result in tearout. Takes glue and finish well. Odor: Slight.
Basic surface-mounted hinges for a variety of small-scale projects such as jewelry boxes, cases and small cabinets. Available in a variety of sizes and finishes-scroll down to see the full selection. All dimensions listed are for the hinge in the open position. Flat-backed for surface mounting. Matching screws included. Priced per pair. Made in USA.Technical Details:Designed to be surface-mounted with both leaves exposed (included screws sit proud of the hinge leaves).Plated finish.Non-removable pin.Includes matching screws. Made in USA