Bendix Gesso Leaf with Egg and Dart Crown Moulding
A stunning crown with a remarkable three-dimensional appearance. Each piece is precisely shaped, sanded and ready for finishing.Moulding has a 4-1/2" drop x 4" ext, made from a wood backing with clay surface for embossing, and issold in 8 foot lengths.Extra shipping charges will apply.Due to the size of this item, additional shipping charges are required. A special shipping charge of $19.00 covers 1 - 3 pieces. If you order 4 or more, the special shipping charge is $25. When your order is processed, these special shipping charges will be adjusted internally. The special shipping charges that appear in your shopping cart at checkout will not be correct.
Related Products
Combination Waterstones
Keep your valuable tools in peak condition!Combination Waterstones: For preliminary sharpening where chips exist or bevel angle need to be changed, use the 250/100 waterstone. To remove smaller nicks and do a finish sharpening of woodworking chisels and other tools, the 800/4000 combination is the best choice. Finally, use the 1000/6000 waterstone for creating a polished edge. As shown in the photo on the left.Extremely tough man made abrasive material. These stones cut faster than oilstones. Stones must be soaked in water prior to use and kept wet with water during use. Waterstones develop a slurry to speed the honing process.20549 - 250/1000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)20542 - 800/4000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)47506 - 1000/6000 Combination Grit Waterstone: 8-1/8" (L) x 1" (thick) x 2-1/16" (W)47522 - Nagura Stone: 3" (L) x 1" (thick) x 7/8" (W)Nagura Stone: Forms a paste on finer grit Waterstones to speed and enhance polishing. Use with the 6000 grit stone. These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet - dry abrasive sheet.Waterstone Holder: For non-slip sharpening. The arms are made from chrome plated steel that resists rusting. Holder handles stones 7 to 9" long.
Bulls Eye Shellac-Amber
Trusted by generations of woodworkers, shellac is a traditional, quick-drying finish that is ideal for antiques and fine furniture. It is durable, non-yellowing and imparts a warm glow to all wood surfaces. Also works great for sealing wood, knots and drywall prior to applying paint. All-natural and non-toxic, this shellac is safe for use with children's toys. Blocks all odors. Amber or Clear.Will adhere to glass and ceramic.For best results, thin to a 2 lb. cut (2 parts denatured alcohol, 5 parts shellac).May be tinted by adding up to 1.5 oz. per quart.Apply several thin coats with brush, pad or lint-free wiping cloth.1 quart covers approximately 100-150 sq. ft., depending on porosity.Dries to touch in 30 minutes.Let dry 1 hour before sanding with 220 grit or finer sandpaper.Allow subsequent coats to dry at least 1 hour before sanding.Cleanup with denatured alcohol or household ammonia and water.This product is not dewaxed.Not recommended as a sealer under polyurethane.Please note that this item can be shipped only by UPS Ground to addresses within the continental United States.
Robert Sorby Square-End Scraper
For finishing convex and flat bottomed forms.For finishing convex and flat bottomed forms. The end profile can be modified to a specific shape as required, e.g. diamond point.