These hand carved Red Oak capitals will make a fine finish for your project. Each piece is precisely shaped, sanded and ready for finishing.Small capital measures 7/8"D x 1-3/4"W x 2-3/8"H.Medium capital measures 1-3/8"D x 2-5/8"W x 3-5/8"H.Large capital measures 1-3/4"D x 3-1/2"W x 4-3/4"H.
The Nova Titan Chuck is a four-jaw, self-centering scroll chuck for large lathes with a 20" diameter swing or larger. It is the largest, most ruggedly built chuck in the Nova range - a full 5" in diameter - and provides super aggressive holding power. The TuffLock geared grip provides incredibly smooth operation and vibration free performance. With single-handed operation, you'll spend more time turning and less time setting up. The chuck is operated with an included ball nose hex wrench with a large, easy-grip handle for fast, positive location. The Titan chuck also features a fully sealed backing plate that prevents buildup of wood dust, ensuring minimal maintenance. Includes PowerGrip jaws. 1-1/4" 8-TPI RH thread (dedicated thread only). Recommended for power workholding on lathes with a 20" to 33" diameter swing.Up to 838mm/33" diameter bowls (using PowerGrip jaws).Up to 482mm/19" length spigots (using PowerGrip jaws).Full packaged weight is (std) 3.67kgs/7.93lbs.Solid sheet steel backing plate prevents build up of wood dust, ensuring minimal maintenance.Precise geared grip with Tuff Lock technology delivers incredibly smooth power.Large 5" diameter chuck body is perfect for large lathes and big projects.Single-handed operation means more time spent turning and less time spent preparing.Ball-nose hex wrench with large, easy grip handle for fast, positive location.Body made from precision machined 1045 High Tensile Steel with a polished self metal finish to allow for closer tolerances.Able to take all Nova accessory jaws.Range of Powergrip Jaws: Expansion: 3.740"-4.961"Contraction (square): 2.165"-3.386"Contraction (spigot): 3.031"-4.252".
Achieve a soft preliminary finish on turnings with this lacquer-based sealer. Providesan excellent base for High Build Friction Polish (sold separately) to bring about a highglossshine. 500mL.Caution: Highly flammable. Keep out of eyes and off of skin. Use in a well-ventilatedarea.
Just rotate the plates of the Longworth Style Chuck and the soft silicone buttons close in almost instantly, and with perfect concentricity, to hold your project while you make the finishing cuts to the bottom side. Unlike many other rechucking methods, the silicone buttons won't mar your project or your finish. When compressed with the wing nuts, they expand to provide a secure grip. The 1/4" thick phenolic plates provide strength and stability, regardless of humidity. Available in two sizes: the 10" Longworth Style Chuck for mini and midi lathes with a 10" swing, and the 16" Longworth Style Chuck for standard-sized lathes with a 16" swing or larger. Pick up a piece of fine china, and the first thing you'll do after admiring the faceis turn it over to inspect the bottom and insignia. It's no different with turnedbowls, and turners work hard to make the bottom as beautiful as the top. Butchucking a finished bowl face down on the lathe without damaging it hasalways been a challenge - not with the Longworth Style Chuck. Simply rotatethe plates, tighten down the buttons, and you're ready to turn.Eliminates the time and inconvenience of installing, adjusting and readjustingordinary rechucking jaws.Capable of holding projects in compression or expansion mode (from theinside or outside of the rim of your turning project).Buttons close in concentrically, making it easy to center your project.Soft silicone buttons have increased length for better grip and expansioncapabilities.Buttons expand when the wing nut is tightened, and will not mark or deformyour turned piece.Includes 8 buttons. Replacement packs of buttons with hardware are availableseparately (47455).No assembly required.1/4" phenolic discs are extremely durable, stable, and spin in opposingdirections with almost no resistance.The back side of the Longworth Style Chuck has a steel disk approximately 3/8"thick for mounting.The disk is easily gripped by any brand of 4-jaw scroll chuck with the standard50mm #2 jaws.Straight jaws may be used, but dovetail jaws provide a better hold.The dovetail groove accommodates Nova chucks and Vicmarc chucks as well asOneWay type straight jaws.Recommended maximum RPM is 600.Intended for light finishing cuts only. Note for heavy stock removal. Note: Best practice for safety dictates that you engage the tailstock wheneverpossible. Remove the tailstock only when finishing the last bit in the very center,and for finish sanding.Specifications:Capacity in compression mode: 4-1/2" to 8" in diameter.Capacity in expansion mode: 5-3/4" to 9-1/2" in diameter.