Give your project a truly finished look with our bun feet.
The distinctive striped appearance of Zebrawood has made it a favorite for decorative inlays and veneers. The color ranges from golden-yellow to a peanut butter tone with chocolate veins running through it. The wood is hard, dense and extremely tough. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about tearout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Native to: West Africa, especially Gabon and Cameroon.Tree Data: 48" to 60" diameter trunk. The trees generally have very thick bark.Sapwood: Pale yellow.Heartwood: Light golden-yellow or pale yellow-brown, with narrow streaks of dark brown to almost black, giving a striped appearance.Grain: Generally interlocked or wavy, yielding a ribbon figure. Texture: Medium to coarse. Luster: High luster.Resin: Occasional resin pockets.Movement: Dimensionally stable. Retains its shape well after machining.Veneering Qualities: Zebrawood is used extensively in veneers for cross banding and inlays. Bundles of veneer should be stabilized with weights to prevent buckling.Working characteristics: Responds well to hand and machine tools. Quite easy to saw, but due to interlocking grain, planing is very difficult, often resulting in tearout.Polishing: Good polishing and finishing qualities. Strength: Compressive strength parallel to the grain is high. The wood is hard, very heavy, and very dense. It is tough, with good impact resistance.
Can't quite fit your drill into that narrow space? No need to get a whole new set of long bits. Just pop any of your existing 1/4" hex-shank drill bits or driver bits into one of these extensions. The 12" extension allows most people to reach an 8' ceiling without a ladder, and you can even line them all up for 21" of reach! Not for use with impact tools. Each extension includes a 1" #1 Plain Hex Phillips Bit and a 2" #2 Power Groove Phillips Bit.Features & Benefits:Chuck's small 5/8" diameter fits through slim holes for increased versatility.True one-handed operation, simply push the bit into the chuck.Patented All-Hex Design holds bits tight, even when removing bits from holes.Positive action doesn't let go until you want it to.Will accept any 1/4" (6 mm) hex shank accessory, with or without a power groove.Only chuck that accepts all standards, ANSI, JIS and DIN.Black oxide finish with plated steel chuck give excellent corrosion resistance.Replaces all magnetic and non-magnetic bit holders.Quick Change hex-shank and hardened extensions optimize drill torque.Fits all keyed and keyless chucks.Works in all corded and cordless drills.Only chuck that holds all screwdriver bits 1" and longer.Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4" hex shank power tool accessories.
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.Also available with the economical Silver I.C.E coating.