EF Wood Stain - General Finishes - Brown Mahogany

This stain features the low-odor and easy cleanup of water-based stains, while emulating the easy spreading, blending, repairability and generous open times of oil-based stains. The blend of high-quality dyes and pigments provides rich, even color, and the heavier bodied formula allows controlled penetration, reducing blotching on hard-to-stain woods such as Aspen, Pine and Maple. Non-flammable and free of harsh chemicals and toxic vapors. Ideal for use with children's toys and furniture.Apply liberally with a foam brush or a paint pad applicator.Dry time is normally 1-2 hours under ideal conditions (70°F, 70% humidity).Cooler temperatures/higher humidity will prolong dry time up to 8-10 hours.If necessary, thin with 10-20% water.Coverage: 150 sq. ft. per quart.Note: Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.

$11.99
Buy
 

Related Products

Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table

Powermatic TS29 Shaper, 7-1/2HP 3PH 230/460V with Sliding Table
$8,629.99

The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.Sliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenonsFully adjustable fence with dual digital readout for fast, accurate set-up and repeatabilityLarge table with built-in slider with room for stock feeder7" vertical spindle travel allows stacked toolingSpindle tilts negative 5 degrees to positive 45 degrees for increased versatilityLarge diameter multiple table inserts accomodate virtually any size cutterFive spindle speeds in forward and reverse with lighted indicatorSpecifications:Brand:PowermaticDust Collection Minimum CFM Required:800Dust Port Diameter (OD/in.):5 (dual ports)Electrical Controls - Magnetic Starter:24V MagneticFence Size (L x H/in.):46 x 5Fence Travel (Major and Minor/in.):5-3/8 and 3-5/8Height:53inchLength:51inchMaximum Diameter Cutter Above Table (in.):12Maximum Diameter Cutter Below Table (in.):9Model Number:TS29Motor HP:7-1/2HPMotor Phase:3PHMotor Voltage:230/460VNet Weight:1100poundOverall Dimensions:51 x 44 x 53Part Number:1791284Prewired:Prewired 230VReversable:YesRouter Bit Collet Diameter (in.):1/4 and 1/2Ship Weight:1280poundSlide Table Size (in.):11-1/4 x 51-1/4Spindle Diameter (in.):3/4, 1, and 1-1/4Spindle Size Under Nut (in.):3/4 Spindle - 3-1/2, 1 Spindle - 6-1/4, 1-1/4 Spindle - 6-1/4Spindle Speed (RPM):3000, 4000, 6000, 8000, and 10,000Spindle Travel (in.):7Table Inserts:one tilting, two straightTable Size (in.):51-1/2 x 33-1/2Table T-Slot (in.):n.a.Table Travel (in.):49-1/4Tilting Spindle (deg.):5 degrees back, 45 degrees forwardWidth:44inch

Curly Maple Sold by the Piece-1/2" Thickness

Curly Maple Sold by the Piece-1/2" Thickness
$10.99

This curly soft maple is highly figured with tiger-striped rays running perpendicular to the grain pattern. Along with the wood's light color, this striping lends a shimmering quality to the lumber. Even unfinished, the wood has a very pleasing interaction with light. It is no surprise, then, that curly maple has become a woodworker's favorite for accents, specialty furniture, musical instruments, and more.To make the figure in this curly maple really "pop", we recommend using an oil product (tung, linseed, etc.), as opposed to a stain. If a lacquer or urethane finish is necessary, adding a coat or two of clear wax-free shellac before the final finishing will ensure that the figure stands out.

General Finishes Argentine Pearl Effects

General Finishes Argentine Pearl Effects
$39.99

Use General Finishes Pearl Effects in combination with other finishes to create a unique metallic look with depth and shimmer. Pearl Effects may be applied over General Finishes Milk Paints, stains and water-based topcoats to create translucent metallic effects. Available in a range of decorative pearlescent colors. The resulting effect will vary greatly depending on what the Pearl Effects are combined with. The color swatch shown is an example combined with either a milk paint or a stain along with a topcoat of General Finishes High Performance Flat.Features:Water-based acrylic base for easy clean-upMay be applied with a foam brush, bristle brush, pad applicator or sprayNote: Always test for compatibility when using this product with other brandsSample ShownPearl Effects are semi-transparent glazes designed to add a special visual effect to your project. The sample shown was achieved by applying the following: Snow White Milk Paint Argentine Pearl Effects