Embossed Carvings-Select Option

These quality carvings come ready to finish. Choose from Birch or Oak. Each side is 1" High x 2-1/4" Wide for a total width of 4-1/2". Sold in Pairs.

$5.49
Buy
 

Related Products

Powermatic 8'' Parallelogram Jointer

Powermatic 8'' Parallelogram Jointer
$2,244.99

The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.Extra long 82" table for expanded work support Parallelogram design helps maintain table parallelism and eases table raising and lowering Handwheel with worm gear system for precise fence tilting (Patented) 1/8" depth of cut limiter for fast table positioning High-mount switch for operator convenience No-mar fence insert protects tableProduct Specifications:Powermatic Part Number: 1610079Model Number: PJ882Brand: PowermaticHeight: 44"Width: 28"Length: 84"Net Weight: 610 lbs.Cutting Capacity (W x D): 8" x 1/2"Cutterhead Speed: 7000 RPMCuts Per Minute: 21000Cutterhead Diameter: 3-1/16"Number of Knives: 3(Helical/Standard): Standard Knife Size (L x W x T): 8" x 11/16" x 1/8"Rabbeting Capacity: 1/2"Table Height: 31-5/16"Table Size (L x W): 82" x 8"Infeed Table Length: 44"Outfeed Table Length: 38"Fence Size (L x H): 38-3/16" x 4-3/4"Fence Tilts: 45 degreesFence Positive Stops: -45 deg., 45 deg., 90 deg.Dust Port Outside Diameter: 4"Dust Collection Minimum: 450 cu.ft/minCFM Required: Motor Power: 2 HPMotor Phase: 1 PhMotor Voltage: 230 VMotor Current: 9 A

Wunderfil Wood Filler - 8 oz. Assorted Colors

Wunderfil Wood Filler - 8 oz. Assorted Colors
$9.99

Dual-purpose filler for everything from nail holes to wood grain.Versatile Wunderfil™ works great on both finished and unfinished wood. Use full strength for holes or thin with water for filling open grained woods. A water-based, stainable formula makes cleanup a snap! Original Natural Oak Wunderfil is also available in pint and quart sizes separately.

Non-Stick Pen Bushings for CA Finish

Non-Stick Pen Bushings for CA Finish
$6.99

Using CA glue to finish your pen turnings results in a lustrous, glossy polish,but it can also fuse your pen blank to the bushings. Not so with these non-stick polyethylene bushings in place, however. These bushings are made fromUHMW, the same super-slippery polymer used in our Plastic Jig Stock. They'repre-drilled for a standard mandrel, and have a 60° taper so they'll fit most anysize pen bushing. Just swap these for your metal bushings once the pen isturned, and apply your finish. 4-Pack.Technical Details:Non-Stick Pen Bushings are made of UHMW (Ultra-High Molecular Weight)polyethylene.Pre-drilled for a standard 7mm mandrel (e.g. 43537, sold separately).60° cone-shaped taper fits any size pen bushing.After shaping the pen blank, replace the metal bushings with non-stick plasticbushings and apply your CA finish.Self-lubricating UHMW has a low coefficient of friction, so it sheds glue easily.Very stable - 10x heavier than regular high-density polyethylene.High abrasion resistance and high impact strength even at low temperatures.Resistant to chemicals.