Featuring a finely carved leaf pattern, this solid wood tile adds a regal touch to the corners of doors, windows, fireplaces, cabinets, furniture and more. The tile is available in a variety of hardwood species and arrives ready to finish.Technical Details 5" wide x 8" high x 1" thick Available in hard maple, cherry, and alder Unfinished wood
Inlay blank comes pre-assembled with laser cut pink ribbon component so all you have to do is make sure everything is aligned well and then flood with CA glue. Once cured,secure the barrel to the brass tube with two-part epoxy. Sand the ends flush with the brass tube and mount on your lathe for turning and finishing. Designed for Manhattan Chrome, Manhattan Gold, and Elegant Manhattan style pen kits only, sold separately. For easy-to-follow directions (including color photos) on applying the CA finish to your pen kit, see the article "My Simple CA Finish" by Colin Nelson.Features:Fits Manhattan Pen Hardware Kits (Sold Separately)Difficulty Level (1 Easy - 5 Hard): 1
This is the recommended oil finish for oily woods such as Teak, Rosewood, Zebrawood, Monkeypod and many others. Unlike linseed oil and most other oil finishes, which become tacky when exposed to heat, Teak Oil penetrates the wood, dries hard and stays hard. Can only be shipped by UPS Ground to addresses within the continental United States.Note: This product is not available in the Pasadena, Torrance Orange and Ontario stores due to AQMD VOC requirementsMay be applied over raw, stained, newly stripped or previously oiled wood surfaces.Use a stiff brush, clean rag or fine, nylon mesh pad.Uniformly "flood" the entire surface.Wait 5-10 minutes. If dry spots occur, reapply to achieve uniform wetness.After 30 minutes set time, wipe and lightly buff with a clean cloth.After 24 hours lightly buff with a clean cloth, then buff with extra-fine steel wool to achieve a uniform sheen.
This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts - this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC MotorTwo push blocksDust collection portCutterhead guardIndustrial push-button switch