Friction Lid Supports-Curved

Curved Friction - Use in cabinets where depth is limited. Works in boxes as shallow as 2-1/2". Brass finished steel. Screws included. 5-1/2" overall. Price for one support.

$6.99
Buy
 

Related Products

Cherry by the Piece-1/4" Thickness

Cherry by the Piece-1/4" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

1-1/2" Long x 9/16" Diameter Maple Spindles, 8-pack

1-1/2" Long x 9/16" Diameter Maple Spindles, 8-pack
$4.99

Hard Maple Spindles, smoothly sanded and ready for finishing. Use on plate rails, spice racks, and headboards. 8 per pack. Spindles measures 1-1/2" high (not including tenon), and 9/16" in diameter at widest point. Tenon is 3/8" in diameter.

Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge

Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge
$83.99

Make turning a little easier and a lot more fun with Crowns exclusive Pro-PM Powder Metallurgy High Speed Steel Spindle Gouge! This gouge is the "elite' of all turning gouges. Made from an advanced Powder Metal, the molten steel has been compressed and sintered giving this Pro-PM turning tool a cutting edge which lasts up to four/five times that of a conventional High Speed Steel tool. The chisel is hardened to between 66° and 68° Rockwell, enabling it to have a vastly superior wear resistance, excellent grinability, superior toughness, a high working hardness and a high retention of hardness. The ergonomically designed stained black ash handle makes the finished chisel unbeatable.Technical Details:From Crowns exclusive Pro-PM Powder Metallurgy High Speed Steel tool lineMade from an advanced Powder MetalMolten steel is compressed and sintered giving this Pro-PM turning tool a cutting edge which lasts up to four/five times that of a conventional High Speed Steel toolChisel is hardened to between 66° and 68° Rockwell, enabling it to have a vastly superior wear resistance, excellent grinability, superior toughness, a high working hardness and a high retention of hardnessErgonomically designed stained black ash handle