Bringing you the best of both water- and oil-based finishes, this advanced self-crosslinking top-coat combines the easy cleanup and fast dry times of a water-based finish with the warm amber hue of an oil-based finish. Its air-oxidizing curing process makes it extremely rugged, plenty strong for even hardwood floors. It is VOC-compliant, low-odor, non-flammable and cleans up with soap and water. Dries tack-free in only 10-30 minutes and can be recoated in 2-4 hours. Brush, roll or spray on. Available in Satin, Semi-Gloss or Gloss.Features:Slight amber hue looks more like an oil-based varnish than a water-based finish.Very durable.Highly water resistant.Can be used over most water-based and solvent-based stains.Oil-based stains should dry a minimum of 48 hours before applying Enduro-Var.Dries tack-free in 10-30 minutes.Recoat after 2-4 hours.Enduro-Var is self sealing. Do not use over other sealers or topcoats without consulting with General Finishes for compatibility: www.generalfinishes.com.
Building backless shelving systems and furniture with our I-Semble Slip-on Shelf Brackets (47934, sold separately) couldn't be much simpler, but if the shelving system is very large, you might need some additional support against racking. That's where the I-Semble Cross Strap Book shelf Stabilizer Kit comes in. Without clunky braces or supports, the two wires in the system "tie off" the diagonals of your bookshelf to prevent racking. The wires thread through four banjo screws (included) at the corners, which act much like banjo tuners, adding balanced tension as needed. The metal L-brackets that hold the banjo screws wrap around the wooden parts, ensuring that the banjo screws will not tear out, even in substrates such as MDF and particle board. The stabilizer kit also works beautifully on any ordinary shelf or cabinet that needs additional support against racking, such as older furniture where the joints have started to loosen up.Technical Details:Provides support against racking without ugly braces or supports.A very modern minimalist look, no backs required to stabilize your bookshelves.Metal L-brackets securely attach to the wooden elements in your bookshelf, preventing tearout and loosening over time.Zinc-plated finish on all hardware.Diagonals need not extend to the extreme corners of your bookshelf or shelving system, but two kits may be required for very large projects.