General Finishes Wood Stain - Mahogany

General Finishes wood stains are made from the highest quality oils, resins, and pigments to ensure your finishing project will be an easy and rewarding experience.

$8.99
Buy
 

Related Products

Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades

Freud LU91R Thin Kerf Sliding Compound Miter Saw Blades
$63.97

This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.Also available with the economical Silver I.C.E coating.

Freud LU86R Industrial Thin Kerf General Purpose Saw Blades

Freud LU86R Industrial Thin Kerf General Purpose Saw Blades
$40.97

This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.The LU86R006M20 blade is for Festool, DeWalt, and Makita track saws.

Freud LU71M Industrial High-Production General Purpose Saw Blades

Freud LU71M Industrial High-Production General Purpose Saw Blades
$96.47

This highly aggressive general purpose blade is ideal for a production environment. With its low number of teeth and steep hook angle, this blade can operate at high feed rates. These features also make it the blade of choice when crosscutting extremely thick stock. Use it with dimensioned stock where speed is more important than surface quality. The ideal working range is from 1/4" to 1-1/4" thick for ripping and 1-1/2" to 3-1/2" thick for crosscutting. Thicker or thinner material may be cut, but some loss of surface finish may occur. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.