Hafele Pull-Out Pants Racks, Full-Extension-Chrome-Plated

Easy access, space efficiency, and smooth wrinkle-free pants, that's what you get with the Synergy Pull-Out Pants Racks from Hafele. No more trying to fish a pair of wrinkled pants from the bottom of an unwieldy stack - just slide out the rack and lift the pants off the hanger or slip the hanger off the rack entirely. Every pair is readily visible, and hangs freely with no sharp folds. The racks ride on full-extension slides and come in three different widths, each with a set of unique no-swing hangers that keep your pants from tipping off: 18"W (12 hangers), 24"W (18 hangers) and 30"W (24 hangers). The racks come in a chrome plated finish to interface seamlessly with other Hafele accessories. All racks are 13-15/16" deep x 2-5/16" wide with the hanger included.Additional 18-packs of hangers are available separately (Rockler #41257).All hangers are constructed of steel with a black epoxy-coated finish.Optional Garment Clip (Rockler #41258) attaches to hangers for hanging skirts and pants with zero folds (2 required per hanger).Pants Racks are 13-15/16" deep x 2-5/16" wide.

$114.99
Buy
 

Related Products

Maple by the Piece-1/8" Thickness

Maple by the Piece-1/8" Thickness
$4.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined S4S to 1/8" and 1/4" thicknesses, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

Slimline Soft Touch Stylus Pen Hardware Kit - Gun Metal

Slimline Soft Touch Stylus Pen Hardware Kit - Gun Metal
$6.99

A twist-action pen on one end, a stylus tip for touch screen devices on the other. Slimline Soft Touch Stylus Pen Kits have a narrow, lightweight design, and feature a smooth twist mechanism for retracting the tip. The perfect pocket pen for life on the go. Includes pen hardware kit and replaceable ballpoint refill (cross style). Features a Gun Metal finish.Turning Accessories Needed:Turning Blank (Sold Separately)Pen Turning Mandrel (Sold Separately) Slimline Soft Touch Stylus Pen Bushing Set (#46697 Sold Separately) 7mm Drill Bit (#36372 Sold Separately) Pen Mill Kit (#47526 Sold Separately)Also Available in:Gold-PlatedChrome

Powermatic 6'' Jointer w/Helical Cutterhead

Powermatic 6'' Jointer w/Helical Cutterhead
$1,429.99

This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts - this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC MotorTwo push blocksDust collection portCutterhead guardIndustrial push-button switch