Originally designed to keep shoes from getting jumbled up on the rack, these sturdy steel fences work equally well for tidying up clothing and other odds and ends as well. The "fence posts" slip into 5mm holes drilled into the shelf. The spacing of the posts is compatible with the standard European 32mm (1-1/4") hole-drilling system. Available in 11", 17", 23" and 29" lengths in a matte nickel powder coat finish. 1-1/2" High.
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.Also available with the economical Silver I.C.E coating.
You won't need a hammer with this innovative spring tool that lets you center punch and drive finish nails with ease. Two Bit Snapper features hardened steel and ringed ends for sure grip.Spring tool features center punch and 2/32" nail set. Center punch lets you create indentations in the surface of numerous materials. Simply mark spot to be punched, place and press tip on mark, lift plunger and release. 2/32" nail set lets you drive finish nails below the surface of wood. Just drive finish nail to within 1/8" of surface, place and press cupped tip of setter over nail head, lift plunger and release. Nail set is best suited for #5 and #6 finish nails.