This Slide-Out Belt Rack from Hafele tucks your belt collection into a narrow space, yet provides easy access with the 3/4 extension slide. With hooks for six belts, plus plenty of room for stacking, you won't have to sacrifice selection for the sake of order. Choose from three finishes to match other Hafele Synergy accessories. Anodized aluminum with black plastic hooks. 14-1/8"L x 2-3/16"W x 1-11/16"H.
The foolproof finishing system! Just wipe on with a clean cloth and you're ensured of professional quality results without brush marks. Stains dry to the touch in minutes. If you want a darker color, apply another coat of stain in only 6 hours. Once you're satisfied with the color, apply General Finishes's satin gel topcoat finish. Special formula repels dust between coats. No sanding needed between coats and no unpleasant smell.Note:Coded as a flammable substance by the U.S. Department of Transportation. Can not be shipped by air or through the postal systemHow To Apply the Oil Base Gel StainApplying the gel stain is a simpler process than traditional stains that require sanding between coats. Before you apply your stain however you should prep your piece to ensure the stain covers correctly. Clean the surface you plan to stain Sand the surface. The suggested grit is 120-150 grit, you want to make sure that any existing finish that might be peeling is removed so the stain applies to the actual project surface. Apply the gel stain liberally with either a cotton cloth, natural bristle brush or a poly foam brush. (Be sure to test a small area of your project to make sure it is the finish you want and that the application method you've chosen is working well for you.) Wipe off the gel stain going with the grain using a clean dry cotton cloth or high quality paper towels. Let it dry, between coats give you project a chance to dry. Drying time varies based on the size and nature of your project as well as the environment it's located in. Normally drying time ranges from 6 to 12 hours. Repeat Steps 3-5 IF you want more coverage or you want a deeper/richer finish.Suggested TopcoatTopcoat can be used as a sealer over paints and stains or as a clean finish. If you want to use a top coat the recommended topcoat is Oil Based Arm-R-Seal Urethane Topcoat (sold separately).
Smooth, round edges form a flowing profile pattern and give your room a classic look. High-quality kiln-dried wood will match with Redmond Crown Molding, Chair Rail and Casing (all sold separately) to preserve a consistent and beautiful theme. 5-1/4" height offers standard wall protection and a decorative accent to give a finished look to any room. 1/2" thick. Unfinished. Available only in 6', 7' and 8' lengths.There is a $10 extra shipping charge per order.
Our Custom Cabinet Door and Drawer Front Program lets you order high-quality cabinet doors and drawer fronts to create just the right look for your kitchen cabinets or furniture pieces! Transform your old kitchen cabinets and save thousands over replacing them. Or, save time on your next new cabinet or furniture project by outsourcing one of the most time-consuming parts - building doors and drawer fronts. These solid wood doors come sanded smooth and ready to finish.Place your order in two easy steps: Select your desired wood species.Enter the dimensions for each door or drawer front and add them to your cart.Note: this decorative door style is available only in the profile shown. Custom edge options are not available. Please see the tech spec tab for tips for measuring and important information about this product.Please allow 3-4 weeks for delivery.