Hot-Melt Edge Bandings “ 25' Rolls

An ordinary household iron is all you need to apply this premium hot-melt edge banding. Just position the edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent bond. They also are pre-sanded and readily accept stains and finishes. Both solid wood edge bandings and melamine edge bandings are available.Features:Wood edging is made of solid hardwood veneer.Available in a variety of wood species some of them difficult to find in edge bandings.

$7.99
Buy
 

Related Products

Robert Sorby Oval Skew Chisel

Robert Sorby Oval Skew Chisel
$59.99

A delicately balanced tool essential to the spindle turners kit.Delicately balanced tools that are the planes of the spindle turners kit. Designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrade and chair legs. These tools are indispensable if a fine finish is required from the tool.

Center Corner Trunk Hardware

Center Corner Trunk Hardware
$8.99

A protective and decorative light angle corner for the edge of trunks. Center Corner is 1-3/4" x 1-1/2". Supplied with #7 x 5/8" pan head screws. Set of 4. Plated.Technical Details:Protective and decorative light angle cornersCenter Corner is 1-3/4" x 1-1/2"Comes with #7 x 5/8" pan head screwsPlated finish in Nickel, Brass or Antique BrassSet of 4

Behlen Encore Brown Toner for Stringed Instruments, 13 oz.

Behlen Encore Brown Toner for Stringed Instruments, 13 oz.
$13.99

Behlen Guitar Toners are used to add controllable, even color to your guitar. Made from fade resistant dyes, they apply transparent color so the beauty of the wood shows through, yet they are strong enough that a few coats will create pleasing, even color. Encore Brown is used to create a sunburst or starburst effect, or to tone the sides of an acoustic guitar darker. Often it is used at the edge, while Starcast Amber (44984, sold separately) is sprayed over the Encore Brown, but in a wider pattern, to create a two-toned starburst. Typically, Vinyl Sealer (48345, sold separately) is applied before the toners, and Stringed Instrument Lacquer (48954, sold separately) is applied after the toners to create a professional finish. Also available from Rockler, the Behlen Sunburst Guitar Finish Kit.