The top pick for smooth, flat-bottomed holes with no tearout. Outer cutting edge slices through the perimeter for a clean finish every time. Perfect for doweling, mortising, pocket holes, hardware installation and more! Also available in standard sizes.Presharpened High Carbon Steel bits are ready to use in any type of woodExceptionally smooth sidewalls and no surface tear-out
This 15" flat pry bar features a black oxide finish for protection against rust and corrosion, and is manufactured from heat treated steel for maximum strength. It features three nail pullers for working fasteners loose from virtually any angle, and one of the pullers also doubles as a hang hole. A great size for the shop or jobsite, the pry bar is just as invaluable tool for careful lifting and prying, as well as it is for all out demolition.Technical Details:Prybar features a black oxide finish for corrosion resistance.Heat treated steel for maximum strength.Prybar measures 15" long for optimum leverage.Three nail pullers for access from almost any angle.
This Carbide Turning Tool from Rockler features a replaceable, rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue. They're great for beginning to advanced woodturners, ensuring quick success without the frustration of dull tools. Since you don't need to invest hundreds of dollars into sharpening equipment, they're also an excellent value.Features:Ideal for giving you a smooth finish in tight areas, such as the detailed beads and coves in spindle turnings.Replaceable D2 cutter measures approximately 1-1/2" long x 1/2" wide.Total overall length of Full Size Carbide Turning Tool is approximately 19-1/2".Handles are 13" long from the butt of the handle to the top of the stainless steel ferrule.Length of the shaft is approximately 6-1/2".Ash handles are coated with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.Note: carbide cutters are not interchangeable between the different tools.
Pumice stone is ideal for finishing and refinishing wood surfaces by removing scratches, blemishes and dents. Use a felt application block (#58271 or 58289) to rub onto the surface. Rotten stone is a finer grit than Pumice stone. Use Rotten stone after Pumice stone to achieve a higher gloss. Can be used with water or a rubbing oil. Water gives a faster cutting action.Technical Details:Pumice StonePowder white1 lbNo odorRotten StoneLight gray1 lb