A hassle-free hanging solution for pictures, paintings and other wall hangings. Sawtooth hangers allow easy adjustability for level, and a secure connection to the wall. Mounting nails included. Also available in Small Zinc Finish and Large Zinc Finish varieties.Technical Details:Easy to level - simply move to the next notch until the picture hangs correctly.Zinc plated for corrosion resistance.Includes nails for mounting the sawtooth hanger to the hanging.
The foolproof finishing system! Just wipe on with a clean cloth and you're ensured of professional quality results without brush marks. Stains dry to the touch in minutes. If you want a darker color, apply another coat of stain in only 6 hours. Once you're satisfied with the color, apply General Finishes's satin gel topcoat finish. Special formula repels dust between coats. No sanding needed between coats and no unpleasant smell.Note:Coded as a flammable substance by the U.S. Department of Transportation. Can not be shipped by air or through the postal systemHow To Apply the Oil Base Gel StainApplying the gel stain is a simpler process than traditional stains that require sanding between coats. Before you apply your stain however you should prep your piece to ensure the stain covers correctly. Clean the surface you plan to stain Sand the surface. The suggested grit is 120-150 grit, you want to make sure that any existing finish that might be peeling is removed so the stain applies to the actual project surface. Apply the gel stain liberally with either a cotton cloth, natural bristle brush or a poly foam brush. (Be sure to test a small area of your project to make sure it is the finish you want and that the application method you've chosen is working well for you.) Wipe off the gel stain going with the grain using a clean dry cotton cloth or high quality paper towels. Let it dry, between coats give you project a chance to dry. Drying time varies based on the size and nature of your project as well as the environment it's located in. Normally drying time ranges from 6 to 12 hours. Repeat Steps 3-5 IF you want more coverage or you want a deeper/richer finish.Suggested TopcoatTopcoat can be used as a sealer over paints and stains or as a clean finish. If you want to use a top coat the recommended topcoat is Oil Based Arm-R-Seal Urethane Topcoat (sold separately).
This plan is your guide to making a simple, functional and beautiful table. The design is modeled after the original farm table at which Julia Child and her husband Paul ate most of their meals. It is now on display at the Smithsonian where it so fascinated Mario Rodriguez that he created this plan for reproducing a similar version. Dispensing with typical leg-to-apron joinery, the table has shouldered brindle joints that lock the legs to a pair of long aprons to eliminate racking. Three dovetailed cross rails link the apron, along with the H-stretcher system, to make it rock solid. Follow this detailed plan to complete all the steps for turning the legs on a lathe, cutting the stopped dovetail sockets in the aprons, fitting the stretchers, assembling the undercarriage, and applying the final finish. Printed Plan Includes: Extensive full-size and scale drawingsComplete cutlistStep-by-step companion article