A handy, easy-to-install low-profile brass clipboard clip.Technical Details:4" wideBrass Plated SteelWide serrated edge on clip keeps paper securely in placeLow-profile, unobtrusive designSupplied with two #5 x 1/2" round head screws
A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.
This hasp features a swinging hook that fits into a saddle-shaped catch, keeping your box firmly closed without the need for a padlock. The swinging latch also features a specially engineered spring washer to keep it in place, whether in the closed or open position. Sold in pairs. Made in USA.Technical Details:Hasp with Swing Latch measures 3/4"W x 1-7/8"H.Top leaf of hasp is 1/2" high.Plated finish - choose from brass or nickel. Specially engineered spring washer keeps the swing latch in place.Includes eight matching mounting screwsMade in USA.
Attractive and simple, the Slimline Pencil is a great starting point for beginners. Turning this basic design is easy, and the result is a stately and reliable click-action pencil that will write for years. The satin plating has undergone a special process resulting in a slightly textured, matte finish that looks and feels great. Use the bushings, drill bit, and mandrel listed below.Turning Accessories Needed:Necessary blank size: 9/16" x 4-5/8" (Sold Separately) Pen Turning Mandrel (Sold Separately) Slimline Bushing Set (#43546 Sold Separately) 7mm Drill Bit (#36372 Sold Separately) Pen Mill Kit (#47526 Sold Separately) Also Available in:GoldSatin NickelBlack Chrome