The hardest part of making a table or bench just got easier! All legs are shaped, smoothly sanded, and ready for finishing.All legs are completely machined and ready for finishing, making it easy to use these classic styles. Note: the final step in creating these legs is hand sanding. Due to this step, there could be a variation of up to 3/16" at the top of the leg. This is within manufacturing tolerances, and will not affect the performance. Price for each leg.
Decorative washers can be used with #8 screws. Increases the holding powers of the screws used.Technical Details:13/64" inside diameter. 35/64" outside diameter.3/32" thickness.50 per pack.Available in Nickel, Black or Brass finishes.Bin Boxes are perfect storage solutions for these washers.
Easy access, space efficiency, and smooth wrinkle-free pants, that's what you get with the Synergy Pull-Out Pants Racks from Hafele. No more trying to fish a pair of wrinkled pants from the bottom of an unwieldy stack - just slide out the rack and lift the pants off the hanger or slip the hanger off the rack entirely. Every pair is readily visible, and hangs freely with no sharp folds. The racks ride on full-extension slides and come in three different widths, each with a set of unique no-swing hangers that keep your pants from tipping off: 18"W (12 hangers), 24"W (18 hangers) and 30"W (24 hangers). The racks come in a chrome plated finish to interface seamlessly with other Hafele accessories. All racks are 13-15/16" deep x 2-5/16" wide with the hanger included.Additional 18-packs of hangers are available separately (Rockler #41257).All hangers are constructed of steel with a black epoxy-coated finish.Optional Garment Clip (Rockler #41258) attaches to hangers for hanging skirts and pants with zero folds (2 required per hanger).Pants Racks are 13-15/16" deep x 2-5/16" wide.
Micro-Mesh is used to polish surfaces back to clarity or a high gloss. Available in grades 1500-12,000.Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss. Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH. Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000