This set of four easy-spin 2-3/8" urethane casters feature a foot-activated lift mechanism that engages or disengages with the touch of your toe. Engage them to lift your bench 3/4" off the floor for mobility, disengage them for stability. Each caster is constructed of durable steel and rated for 100 lbs. - that's 400 lbs. of total capacity with the 4-pc. set! Includes all mounting screws for easy installation.Allows you to maneuver your work bench with little effortDurable steel construction Includes all mounting screws for easy installationSatin black finish
Cut any pizza with ease-a must-have for pizza lovers! Robust, well-balanced hardware is 3X the weight of competing cutters and features a sharp 4'' diameter stainless steel blade. Just add your own custom handle (not included) to top it to your taste. Kit includes a 5/16'' threaded insert that lets you attach the handle or remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in brass or chrome. See our complete line of turning stock to turn the handle for your pizza cutter. Methods to consider for installing the threaded insert: Use a 5/16'' bolt and double nuts on a drill press. Cut the head off a 5/16'' bolt and chuck it in a drill press. Then thread on two nuts and the insert so that it is flush with the end of the bolt. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. DO NOT TURN ON THE DRILL PRESS. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. Finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.
Comfortable, easy-grip outer housing for hours of use without fatigue. Solid metal frame for precision seating and alignment of bearings, motor, and fan, providing for maximum trouble-free tool life. Rubber posts isolate your hand from vibration while enabling full sanding action and efficiency on the work. The result is the smoothest finishing sander available today.Features:Comfortable, easy-grip outer housing for hours of use without fatigue.Solid metal frame for precision seating and alignment of bearings, motor, and fan, providing the maximum in long, trouble-free tool life. Rubber posts isolate your hand from vibration while enabling full sanding action and efficiency on the work.Accepts pre-cut adhesive or self cut standard paper with metal stamp.
Fasten this bottle opener to the cabinet or wall next to the fridge, so you can crack open a cool one without skipping a beat. Solid cast brass provides a heavy feel both in your hand, and in use. Polished finish is not lacquered, and will age naturally with time to acquire a beautiful patina.Technical Details:Solid cast brass construction.Measures 2-1/2"W x 3"H.Projection: 1-1/8".Non-lacquered finish will acquire a beautiful patina over time.An authentic reproduction of antique hardware.Easy surface-mount installation-includes screws.