Easily remove multiple layers of paint, urethane, acrylic, epoxy or enamel without the back-breaking work of sanding and chiseling - and without the odor of other furniture strippers! Made with 100% American-grown soybeans, SOY-Gel is a great natural alternative to harsh chemical strippers. Once applied, it starts to lift the coatings in minutes. Now available in a five-gallon size for up to 1,000 square feet of coverage.One quart gives you up to 50 square feet of coverage - three times the coverage of most traditional strippers.After the finish has lifted, use a Carbide Scraper to remove the bulk of the softened finish.For final cleanup after stripping, we recommend using Emerge All-Purpose Cleaner for best results.Indoors or outdoors, you can be guaranteed a safe and easy restoration.Ideal for lead-based paint removal. The lead becomes encapsulated in the gel, preventing airborne particles and allowing for safe disposal.Does not contain methylene chloride.Cleans up easily with water.Safe to use on wood, brick, stone, metal, plaster, concrete and many other surfaces. Do not use on plastic, PVC or rubber.
Micro-Mesh is used to polish surfaces back to clarity or a high gloss. Available in grades 1500-12,000.Micro-Mesh (Grades 1500 through 12000) was originally designed to polish most hard plastics, fiberglass, epoxy, gel-coat, raw and finished wood, cultured marble, sold surface, painted surfaces, gold, silver, etc. Micro-Mesh is not an aggressive stock remover. Common sandpaper products are required for the removal of deep scratches prior to using Micro-Mesh to polish the surface back to clarity or a high gloss. Use wet or dry with either water or water/detergent as a lubricant. You may also use mineral oil, vegetable oil, lemon oil, etc but DO NOT use anything containing solvent as this will delaminate the MICRO-MESH. Sheets are offered in the following Micro-Mesh grades: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000
Originally designed to keep shoes from getting jumbled up on the rack, these sturdy steel fences work equally well for tidying up clothing and other odds and ends as well. The "fence posts" slip into 5mm holes drilled into the shelf. The spacing of the posts is compatible with the standard European 32mm (1-1/4") hole-drilling system. Available in 11", 17", 23" and 29" lengths in a chrome-plated finish. 1-1/2" High.
The hardest part of making a table or bench just got easier! All legs are shaped, smoothly sanded, and ready for finishing.All legs are completely machined and ready for finishing, making it easy to use these classic styles. Note: the final step in creating these legs is hand sanding. Due to this step, there could be a variation of up to 3/16" at the top of the leg. This is within manufacturing tolerances, and will not affect the performance. Price for each leg.