Tec-Pen Bolt-Action Pen Hardware Kit, Gun Metal

This pen combines the satisfying feel of a positive bolt-action mechanism with the modern functionality of a touch-screen stylus on one end. The stylus can be used to control your smart phone, tablet or other touch-screen device. If you prefer a more traditional look, you can leave the stylus out and install the standard metal end cap-both are included. The sleek design and impressive finish are topped off with a sturdy clip that attaches to the barrel with two miniature screws. Uses a Parker style refill.

$11.99
Buy
 

Related Products

Woodturner's Caliper Set

Woodturner's Caliper Set
$54.99

Three-piece set is designed for reliable, accurate layout and measuring.Technical Details:Contains inside caliper, outside caliper and divider, all in convenient 8" size.Finely machined nuts run cleanly and quickly to secure legs exactly to dimension.Divider legs are precision ground to fine, hardened points for perfect layouts.8" size is perfect for general bench and lathe work.Legs are finished with a durable black epoxy finish. All other parts are nickel plated.Set comes in durable storage wallet.

Polycryl Wood Fortifier

Polycryl Wood Fortifier
$17.99

Punky, spalted wood can yield some of the most intricate grain patterns and texture, but how do you turn or carve it without the whole thing falling apart? That's where Polycryl comes in. A large-molecular-weight acrylic polymer, Polycryl fills and strengthens semi-punky or spalted wood, making it easier to turn and carve. It's easy and safe to use, dries clear and will not yellow in the wood.Polycryl is water-soluble and penetrates best when the wood is green. Polycryl may not fortify extremely punky wood. The softer the wood, the better the penetration. It will not penetrate hard wood. Polycryl should be used before Pentacryl.All types of finishes and glues can be used once Polycryl has dried. The final product should be finished to seal Polycryl into the wood.DIRECTIONS: The wood should be rough-carved or turned first to obtain the best results. Add 1 part Polycryl to 4 parts hot water and mix well. It is important to use a weak solution at first to obtain maximum penetration.Soaking method: Soak wood in the diluted solution overnight or until wood is completely saturated. Once saturated, place wood in a full-strength solution of Polycryl. Let the wood remain in the solution for at least one week. Large pieces may take longer. Once wood is saturated with Polycryl, remove from the solution, drain and dry slowly in an unheated, cool area.Brushing method: When a piece of wood to be treated is too large for soaking, Polycryl can be brushed on. First, brush on the diluted Polycryl solution until the wood is saturated. Cover the wood with plastic to prevent drying between applications. Once the wood has been saturated with the diluted solution, apply a full-strength solution of Polycryl. Brush on as much Polycryl as the wood will absorb and cover with plastic. Repeat this process until the wood is completely saturated. This may take a week or more of repeated applications. It is important to keep the wood wrapped in plastic during the treatment process. Remove the plastic to allow the wood to dry slowly in an unheated, cool area.

Tips for Graco TrueCoat Pro Fine Finish Sprayer

Tips for Graco TrueCoat Pro Fine Finish Sprayer
$41.99

For use with the TrueCoat Pro Fine Finish Sprayer only (44853, sold separately). Graco Fine Finish tips are a uniquely designed tip and guard combination that is optimized for use with the TrueCoat Pro Fine Finish sprayer. Their pre-orifice tips provide finer atomization, resulting in a better finish. RAC tips have two positions: when the lever is pointed forward, the tip is in the spray position, when pointed backwards, it is in the unclog position. TrueCoat Fine Finish Tips are available in a variety of sizes and fan widths, covering all of your fine finish needs. Use with all fine finish materials including "hot" solvents.Technical Details:For use with the TrueCoat Pro Fine Finish Sprayer only (44853, sold separately).Reversible design makes it easy to clear clogs.308 tip is for thin stains, has a 6" fan width, and a 0.008" orifice.310 tip is for medium lacquers and clear finishes, has a 10" fan width, and a 0.010" orifice.412 tip is for heavy enamels, has an 8" fan width, and a 0.012" orifice.To determine the width of the spray pattern for any given Graco tip, multiply the first digit of the tip # by 2. So the 515 tip will have a 10" fan width when sprayed 12" from the surface. The 308 tip will have a 6" fan width.The 2nd and 3rd digits of the tip # represent the size of the orifice in thousandths of an inch. So the 515 tip has a 0.015" orifice. The 308 tip has a 0.008" orifice.With use, paint sprayer tips will gradually wear out, and you will see the fan pattern become narrower. Replace worn tips when fan width is reduced by 25% to minimize material waste and maintain an even spray pattern.