Whistle Key Ring Hardware Kit

Fashion a small connector blank to complete your own whistle key ring. Whistle and key ring components have a brass finish. Includes instructions. Wood blank not included.Prop 65 warning: Contains materials known to the state of California to cause cancer and birth defects or other reproductive harm.

$4.99
Buy
 

Related Products

Robert Sorby Parting Tools

Robert Sorby Parting Tools
$54.49

Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets.Diamond Parting Tool - The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby lessening the chance of burning the bottom of the parted project.

Designer Valet Rod, Oil Rubbed Bronze, Metal (CVR-14-ORB)

Designer Valet Rod, Oil Rubbed Bronze, Metal (CVR-14-ORB)
$15.99

A large selection of valet rods in many styles and finishes.Our designer series valet rods feature a sleek mounting post design with telescoping rod and are available in several finishes.CVR-14-ORB Dimensions: 1.25-0"W x 1-0"H x 13.875-21.875"D Patent Pending .

EF Wood Stain - General Finishes - Shaker Maple

EF Wood Stain - General Finishes - Shaker Maple
$11.99

This stain features the low-odor and easy cleanup of water-based stains, while emulating the easy spreading, blending, repairability and generous open times of oil-based stains. The blend of high-quality dyes and pigments provides rich, even color, and the heavier bodied formula allows controlled penetration, reducing blotching on hard-to-stain woods such as Aspen, Pine and Maple. Non-flammable and free of harsh chemicals and toxic vapors. Ideal for use with children's toys and furniture.Apply liberally with a foam brush or a paint pad applicator.Dry time is normally 1-2 hours under ideal conditions (70°F, 70% humidity).Cooler temperatures/higher humidity will prolong dry time up to 8-10 hours.If necessary, thin with 10-20% water.Coverage: 150 sq. ft. per quart.Note:Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.