Finish: Polished BrassBase Material: Solid BrassMachine Screw Thread Size: #8-32Screws are includedWarranty: Lifetime
At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy to access for emergency shut-downs. With its sturdy steel stand as a foundation, you'll get rock-solid stability, and plenty of storage potential, and the included leveling feet ensure that your router bed stays flat for precise results.MDF Top:Table top measures 28" x 40". Top is made of 1-1/8" thick melamine-coated MDF with 3mm black edge banding.Steel Stand (included):Steel base measures 24"W x 36"L x 32"H.All legs and stretchers are pre-drilled to easily add sides, bottom and hinged doors for a built-in cabinet, and have square holes for easy assembly with carriage bolts. Legs are heavy-duty 1/8" steel to support any shop application. Includes 4" x 1/2" heavy-duty adjustable levelers for various height settings.Includes four 32" legs and all mounting hardware (carriage bolts and nuts).Top stretchers can be mounted flush with top or 4" down to add drawer or woodworking vice. All parts coated with durable black sand paint. Optional casters can be mounted in place of the adjustable feet (47034, sold separately).CNC Controller Bracket:Compatible with controllers for CNC Shark routers.Inside width of CNC Controller Bracket is 11-3/4".Inside height is 5-1/2", which leaves space for the controller to hang below the top stretcher.Sturdy steel construction.
Now you can conceal and access laundry in one easy motion with the Tilt-Out Hamper. Simply mount the basket hanging bracket to a bottom hinged cabinet for easy one step "Slide-In/Slide-Out" basket removal. 2.3 bushels of capacity (74 Qts) Closet Tilt Out Hamper Basket (ORB) Heavy gauge wire construction Limited lifetime warranty Removable Oil Rubbed Bronze Hamper Tilt-out hinge not included (sold separately)
Federal styling relies on simple elements combined to create an elegant, complete design. Our secretary desk uses oval inlays together with tapered legs and slender, light-colored inlay strips.Hardware automatically pulls out lower support.When you close the deck, the hardware pulls the support arm back inside to the stored position. Low profile hinges and pull-out supports maintain a clean, tidy look. The hardware attaches to both sides of your desk. Statuary bronze plated steel, 12" overall.Brush up on all your shop skills, including veneering, leg tapering, dovetailing, inlaying and banding!As you open the door on the Secretary, the door supports slide smoothly out into position.Plan includes exploded views, shop drawings, cutting diagrams, material list and shop tips.From Today's Woodworker.12 pages.Desk support and hinge (31040) sold separately.