Designed to work with the Compact Blumotion Overlay Hinges, these Restrictor Clips limit the opening angle of the door from 105 degrees to 86 degrees - ideal for corner cabinets, adjacent cabinets whose doors open against one another, or any other cabinet where obstacles near the door would be damaged by the knob during opening. Simply clip it on and put an end to your worries about damaging your cabinet doors.Technical Details:Restrictor clip limits opening angle of door to 86 degrees.Made of plastic.Easy clip-on installation.Use one clip per hinge.
Allows BLUMotion Clip Top Hinges to be used with hinge cup hole less than 13mm deep. The spacers fill in the gaps for a solid interface. Often necessary for retrofitting or for thinner doors and narrow stiles where drilling a 13mm cup hole risks boring through the face of the door (e.g. if the door's thickness is reduced by a profiled edge). It fills in the resulting space between the door and hinge, allowing for a shallower cup hole while maintaining proper hinge function. Pair.
Here's an accurate and inexpensive way to set up your drill press for boring the large diameter holes required for cup hinges. Simply align your fence with the hole in the jig, then tighten down your fence. You'll get consistently accurate holes with a perfectly set ''tab'' for your hinge. Set up couldn't be any easier! Made in USA. Appropriate ''tab'' (distance from door edge to edge of cup hole) is laser-etched onto the JIG-ITMade from stable, durable HDPE materialDrilling jigs available for 35mm and 26mm hinge cup holes