Heavy-Duty Plate Joiner Kit Technical Details:3 Year Limited Warranty6.5 Amp motor provides power for the hardest woodsDual rack & pinion fence ensures blade & fence are always parallel for accurate joints every timeOne-piece fence is adjustable and tilts 0-90°45° locating notch in fence allows indexing off the outside surface of a mitered jointFlush cuts can be made at 0° without removing fenceIncludes:carbide bladedust bagvacuum adapterTorx« keywrenchheavy-duty kit boxFeatures & Benefits:6.5 Amp, 10,000 rpm motor provides power for working in the hardest woodsDual rack and pinion fence ensures blade and fence are always parallel for accurate joints every timeIntegral one-piece fence is adjustable and tilts 0-90°Flush cuts can be made at 0° without removing fence45° locating notch in fence allows indexing off the outside surface of a mitered jointNon-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work
Eliminate ' nail pops' while automatically spacing the deck boards at 3/32' !Just cut a slot into the edge of the boards (where they cross the joist) with a biscuit joiner, apply a thin bead of adhesive to the top of the joists, and install the EB-TY 'clip.' The clip is then screwed in at a 45° angle using the Swaneze stainless steel screws (included). EB-TY Hidden Deck Fastening System is highly recommended when using hardwoods such as teak or man-made building material such as Trex. Fasteners made of UV-resistant polypropylene.One pkg. Per 100 sq. ft. of deckSee our selection of Biscuit Joiners for cutting the slots and the Plug Cutters starting and ending screw holes.
The 6" Jointer features three auto-set knives that align themselves in the cutterhead for rapid knife changes. Oversized infeed/outfeed tables are mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a powerful motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.The cutterhead features three auto-set knives that automatically align themselves in the cutterhead 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Built-in ledge for 1/2" rabbeting capacity Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC Motor Two push blocks Dust collection port Cutterhead guard Industrial push-button switch Set of three high-speed, heat-treated auto-set steel knives Virtually all forms of joinery and the tools that cut them depend on straight edges and square cuts. The POWERMATIC 54A 6" Jointer makes it easy to achieve the high levels of accuracy you need in this always-crucial operation. Find out more about the 54A in this informative POWERMATIC Article, or view the Interactive Demo for an up-close look at this state-of-the-art jointer.