This 12" jointer offers big capacity and performance in a machine that is loaded with features. Large center-mounted fence assembly adjusts easily via rack and pinion system with ram lock. Preset stops on the fence body allow for fast angle set-up at 45° in and out, and a positive stop for perfect 90° angles. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also ensures the tables remain perfectly parallel even after years of tough duty. Choose either the standard three-knife cutterhead or the solid steel Helical cutterhead. The helical system makes fast work of knife changing and never needs adjustment. Helical cutterhead with 2-sided carbide inserts for fast knife changes with no adjustments Rack and pinion adjustable cast iron fence assembly for smooth fence positioning without play Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustments Large 84" x 12" table surface for heavy-duty work Table "lips" on both sides of cutterhead aid in noise reduction Full size rabbeting ledge supports large workpieces for rabbets up to 3/4" deep 3HP motor provides plenty of power 3 PhaseStandard Equipment: Cutterhead guard Heavy duty fence Dust port Push blocks Tool kit
The 6" Jointer features three auto-set knives that align themselves in the cutterhead for rapid knife changes. Oversized infeed/outfeed tables are mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a powerful motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.The cutterhead features three auto-set knives that automatically align themselves in the cutterhead 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Built-in ledge for 1/2" rabbeting capacity Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC Motor Two push blocks Dust collection port Cutterhead guard Industrial push-button switch Set of three high-speed, heat-treated auto-set steel knives Virtually all forms of joinery and the tools that cut them depend on straight edges and square cuts. The POWERMATIC 54A 6" Jointer makes it easy to achieve the high levels of accuracy you need in this always-crucial operation. Find out more about the 54A in this informative POWERMATIC Article, or view the Interactive Demo for an up-close look at this state-of-the-art jointer.
Picture frame joiner and fitting tool allows you to make professional quality picture frames every time! Features:Quickly and easily inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods.For use with most types of frame clamps.Technical Details:Includes PushMaster tool, 400 V-nails and instructions, plus a starter assortment of backing nails and flexipoints.PushMaster tool inserts V-nails, flexipoints, backing nails and screw eyes into hard and soft woods.Additional V-nails, backing nails and flexipoints sold separately.V-nails, or frame nails, join the frame corners together to make a tight, firm join.Select a V-nail suitable to the molding height.As a general rule, use a V-nail about 50-60% of the molding height.Flexipoint bendable tabs are used to hold the picture into the frame.
Eliminate ' nail pops' while automatically spacing the deck boards at 3/32' !Just cut a slot into the edge of the boards (where they cross the joist) with a biscuit joiner, apply a thin bead of adhesive to the top of the joists, and install the EB-TY 'clip.' The clip is then screwed in at a 45° angle using the Swaneze stainless steel screws (included). EB-TY Hidden Deck Fastening System is highly recommended when using hardwoods such as teak or man-made building material such as Trex. Fasteners made of UV-resistant polypropylene.One pkg. Per 100 sq. ft. of deckSee our selection of Biscuit Joiners for cutting the slots and the Plug Cutters starting and ending screw holes.