The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP or 3HP motors are totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs.Extra long 82" table for expanded work support Parallelogram design helps maintain table parallelism and eases table raising and lowering Handwheel with worm gear system for precise fence tilting (Patented) 1/8" depth of cut limiter for fast table positioning High-mount switch for operator convenience No-mar fence insert protects tableProduct Specifications:Powermatic Part Number: 1610079Model Number: PJ882Brand: PowermaticHeight: 44"Width: 28"Length: 84"Net Weight: 610 lbs.Cutting Capacity (W x D): 8" x 1/2"Cutterhead Speed: 7000 RPMCuts Per Minute: 21000Cutterhead Diameter: 3-1/16"Number of Knives: 3(Helical/Standard): Standard Knife Size (L x W x T): 8" x 11/16" x 1/8"Rabbeting Capacity: 1/2"Table Height: 31-5/16"Table Size (L x W): 82" x 8"Infeed Table Length: 44"Outfeed Table Length: 38"Fence Size (L x H): 38-3/16" x 4-3/4"Fence Tilts: 45 degreesFence Positive Stops: -45 deg., 45 deg., 90 deg.Dust Port Outside Diameter: 4"Dust Collection Minimum: 450 cu.ft/minCFM Required: Motor Power: 2 HPMotor Phase: 1 PhMotor Voltage: 230 VMotor Current: 9 A
Manufactured by Porter-Cable, this 1000 piece premium quality biscuit mix includes the three most common sizes of biscuits: #20, #10 and #0. Use these compressed wood fiber biscuits along with a plate joiner to make tight, easy to align joints in panel glue-ups and a variety of woodworking projects.Technical DetailsKit contains 500 #20, 250 #10, and 250 #0 biscuits#20 biscuits measure 2-3/8" x 1"#10 biscuits: 2-1/8" x 3/4"#0 biscuits: 1-3/4" x 5/8"
This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts - this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems 66" long adjustable infeed and outfeed tables provide more working surface Fine/quick adjustment lever on infeed table for precision cuts Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts Enlarged sheet metal stand provides a sturdy base 1HP motor offers plenty of power Fence controls are center-mounted for convenience Push button switch is lockable to prevent accidental starting 4" port for dust collection Standard Equipment:1HP TEFC MotorTwo push blocksDust collection portCutterhead guardIndustrial push-button switch