Finish: Black BronzeBase Material: ZincWidth: 1 1/2 inchProjection: 1 1/3 inchKnob Diameter: 1 inchMachine Screw Thread Size: 1 x #8 32 x 1 inchScrews are includedWarranty: Lifetime
Stainless steel edge pull with 1 1/2" (38mm) projectionMaterial: 304 Stainless SteelFinish: Mirror (M)Supplied with stainless steel screws (3.1x20)
Commonly called "campaign hardware", this line of gorgeous recessed brass hardware serves both to beautify and to protect your furniture and surrounding items. The term "campaign hardware" derives from the 18th and 19th centuries, when English officers demanded high-quality, portable furniture while on military marches. The recessed hardware and brass corners allowed furniture to nestle together in a compact stack, and prevented scratches while stowed in the back of a bumpy horse-drawn wagon. Once unpacked and in the tent, however, the furniture served as a beautiful reminder of home.Technical Details:Solid brass recessed drawer pull.Polished finish.Dimensions: 3-9/16"W x 1-3/4"H.Total depth: 7/16" Projection from surface (if surface-mounted): approximately 1/8".Can be surface-mounted or mortised flush with the surface. Sold singly.Installation and Care Instructions: Measure and mark hole fixings with a pencil, preferably onto a strip of masking tape that will help to steady the drill.Drill a pilot hole as a lead for the wood screw. Remember, the included wood screws are made of brass so never overtighten or attempt to drive without a pilot hole, as this can cause them to break off in the wood.Occasional use of a damp cloth, and the use of quality wax polish is recommended to maintain the lustre.
Finishing projects are easy with this affordable solution for small touch-up work. With 1.0mm stainless steel needle/nozzle set for lighter materials. Die-cast aluminum body with chrome-plated finish. 2-step trigger control. 100cc stainless steel paint cup. Spray pattern control knob on side of gun. Adjustable spray width, air inlet and fluid outlet. 15-45 PSI operating pressure. 3.5-6 CFM air consumption. 1/4" air inlet. Non-bleeder type, gravity feed external mix.Accessories (sold separately): Hands-free spray gun holder easily attaches to bench or wall with pre-drilled mounting holes. Funnel/strainer holding ring makes filling paint cup easy. Disposable inline spray gun air filters help reduce painting defects. Removes moisture, oil vapor and rust particles that pass through conventional filters. High flow design minimizes pressure drop to spray gun. 100 PSI maximum pressure. Attaches directly to the air inlet of the spray gun. Inline gravity feed mesh filters remove dirt particles from paint to protect against defects. Inserts into spray gun fluid inlet prior to cup installation.