Belwith Midway Pull, P813-W

Finish: WhiteBase Material: PlasticLength: 3"Width: 3/8"Projection: 1-3/8"Center to Center Hole Spacing:3''Machine Screw Thread Size: #8-32Screws are includedWarranty: Lifetime

$1.27
Buy
 

Related Products

Jet Combination 6'' x 48'' Belt & 12'' Disc Sander w/Open Stand

Jet Combination 6'' x 48'' Belt & 12'' Disc Sander w/Open Stand
$1,119.99

The JET JSG-6DC Sander combines a 12" disc and a 6" x 48" belt to provide raw industrial 1.5 HP sanding power. The exclusive dual thumbscrew belt tracking adjustment locks to keep the belt on track while tackling any tough application. The sander boasts both a quick release belt tension lever and a quick lock dust cover for the disc. The built in handle allows for easy portability around the workshop while the included stand saves room on your workbench.Features:Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-betweenExclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during useGraphite covered steel platen runs cooler increasing machine and belt lifeSpecially designed belt guard allows full use of the 6" belt width and lengthDrive drum is rubber-coated for a better grip on the sanding belt resulting in less slippageTracking adjustment knob with quick-lock handle keeps belt on track during useQuick-release belt tension lever makes belt changes fast and easyQuick-lock dust cover allows fast disc changesSingle 4" dust port on the back of the base collects dust effectively from both the belt and discPowerful 1-1/2HP motor easily handles the toughest sanding operationsBuilt-in handles for easier portabilityHeavy-duty steel open-style stand provides solid supportStandard Equipment:Back stop for horizontal modeMitre gaugeSanding beltSanding disc4" dust chuteOptional Equipment:Open stand, 26"H x 15"D x 19-1/2"W (Stock No. 708566)Closed stand (Stock No. 708598)

Berenson Lexington Pull, 2552-134-P

Berenson Lexington Pull, 2552-134-P
$4.49

Finish: Antique English/Lac OakBase Material: ZINCLength: 5 InchesWidth: 3/4 InchProjection: 1-1/4 InchesCenter to Center Hole Spacing: 3 InchesBase Diameter: 3/4 InchMachine Screw Thread Size: 8-32Screw Length: 1 InchPilot Hole Size: 3/16 InchScrews are includedWarranty: Lifetime

Basic Box Making, Book

Basic Box Making, Book
$19.95

Winner of a 2008 Golden Hammer Writing Award. Learn the art of box making from one of the foremost experts of the craft. Through Doug Stowe's decades of experience, you'll learn the basic techniques to get started, as well as more advanced ways to approach finely crafted boxes. Though it's not necessary to build the projects in this book in any particular order, they are arranged by the level of difficulty. As you grow in confidence working through the projects in this book, use your imagination and ask a few questions: What if this box were made in that wood? What if that joint were used on this box? What if the lid had more overhang? What if I made it larger, or smaller? The question "What if?" will challenge and engage you as a box maker for years of adventure. 160 pages. Contents: Introduction A Simple Lift-Lid Box Prepare the stock Mark and cut the box sides Fitting the box bottom Assembling the box Add keys to the corners Making a lift lid Final touches A Rustic Treasure Box Cut the parts to size Cut the corner joints Make and fit the bottom Assemble the box Add a lid Prepare for final assembly Attach the hinge A Sliding-Top Pencil Box Prepare the stock Cut the joints Rout a groove to house the bottom Make the bottom panel Groove the sides to accommodate the top Assemble the box Fit and shape the lid Install the lid stop A Stationery Box with Hidden Splines Prepare the stock Miter the corners Fit the raised panel Cut the hidden-spline joinery Prepare the inside before assembly Glue up the box Cut the lid loose from the base Make and assemble the base frame Add pulls to the box Install the tray supports and lid keeper strips Make the sliding tray Sanding, finish, and final assembly A Lap-Cornered Box Begin with book-matched stock Mark and cut the lap-corner joints Assemble the sides Make the lid and base Shape the lid and base Finish the box A Fold-Out Jewelry Box Prepare the stock Miter the sides Cut grooves to house the bottom panels Make the top panel Shape the sides Sand the interior Assemble the box Cut and install miter keys Cut the lid and levels apart Make the support arms Make the rear support Make the dividers Sand, finish, and assemble Hinge the lid Cut and install a lining A Jewelry Box with a Sliding Tray Prepare the stock Cut miters for the lid and base Fit panels in the bottom and lid Cut the top and bottom panels to fit Assemble the sides and lid Make the top panel Cut the slots and install the keys Rout a finger grip Making a sliding tray Make the dividers Ease hinge installation with a flipping story stick Install the hinges Final finishing steps A Dovetailed Box with a Wooden Hinge Cutting dovetails starts with tails Assemble the box Build a frame-and-panel base Make the lid Install the hinges Finishing touches Index About the Author: Doug Stowe has been a professional furniture and box maker since 1976. He is the author of numerous woodworking books including Taunton's Complete Illustrated Guide to Box Making. Doug is a member of the New England Associaton of Woodworking Teachers.