The Paasche Talon - or TS - Airbrush Kit represents the ultimate in fine airbrush detail, as well as versatility, creating narrow lines down to 1/64" wide and patterns up to 3" wide with the optional fan head (sold separately). The Talon Airbrush can handle light, medium and heavy fluids and features a double-action trigger for one-handed operation push down to control the air flow and pull back to control the paint flow. It comes with a 0.66mm nickel silver tip installed and 0.38mm tip, needle and aircap in the box. Because it's an internal-mix airbrush, it produces a very fine spray. Additional color cups, bottles, tips and other accessories are available for replacements or for expanding your kit. Anodized aluminum handle. The TS Airbrush is 100% Made in the USA.Minimum $20 order for Paasche direct ship items.Technical Details:"Double-action airbrush" refers to the method used to control the spray pattern. Pressing down on the button regulates the amount of air flow, and pulling back determines the amount of fluid released. This allows the user to change the width of line, color and the opaqueness of color with one hand. Double-action models take more practice to use but are better for freehand detail work.Use the 0.38mm head for finer detail down to a hair line and the 0.25mm for even finer detail.Use the optional TAF-3 Fan Aircap (sold below 45810) with the 0.66mm head for 2-1/2" to 3" flat patterns.The Paasche TS Airbrush features a bottom mount siphon feed, making it suitable for both left- and right-handed users.The TS is an internal-mix airbrush, meaning that air and paint are mixed inside the airbrush, producing a fine spray.Most shop compressors can be used for airbrushing simply dial down the pressure.Specialized compact Airbrush Compressors are also available separately (see 46309, 46705, and 47379).Clean, dry air is essential for best results.Airbrush Cleaning Kit (44559) sold separately for maintaining your airbrushes.PTFE packing enables the MIL to handle any water or solvent based paint.To clean needles, simply spray paint cleaner though the airbrush and wipe off the needle.
* Every piece is hand-finished, hand-polished, and then prior to packaging, every piece is hand-inspected for quality.* Top Knobs products are not just metal, they are a higher grade metal as well - high-grade brass, cast bronze, steel, and zinc alloy for long life, minimal wear, and best finishes.* Our beauty is not just skin deep - you can feel the Top Knobs difference in the weight of our products simply by holding products in your hands.Finish: Patine BlackBase Material: SteelLength: 12-3/4"Width: 11/16"Projection: 2-1/8"Center to Center Hole Spacing: 12"Screws are includedScrew Weight: 0.95Screw Size: M5 Screw packWarranty: Limited Lifetime
Finish: Venetian BronzeBase Material: STEELLength: 6 InchesWidth: 3/8 InchProjection: 1-3/16 InchesCenter to Center Hole Spacing: 128mmBase Diameter: 3/8 InchMachine Screw Thread Size: 8-32Screw Length: 1 InchPilot Hole Size: 3/16 InchScrews are includedWarranty: Lifetime
The JET JSG-6CS Sander combines a 12" disc and a 6" x 48" belt to provide raw industrial 1.5 HP sanding power. The exclusive dual thumbscrew belt tracking adjustment locks to keep the belt on track while tackling any tough application. The sander boasts both a quick release belt tension lever and a quick lock dust cover for the disc. The built in handle allows for easy portability around the workshop while the included stand saves room on your workbench.Features:Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use Graphite covered steel platen runs cooler increasing machine and belt life Specially designed belt guard allows full use of the 6" belt width and length Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage Tracking adjustment knob with quick-lock handle keeps belt on track during use Quick-release belt tension lever makes belt changes fast and easy Quick-lock dust cover allows fast disc changes Single 4" dust port on the back of the base collects dust effectively from both the belt and disc Powerful 1-1/2HP motor easily handles the toughest sanding operations Built-in handles for easier portability One-piece formed steel heavy-duty closed stand with built-in casters provides solid support and portabilityStandard Equipment:Back stop for horizontal mode Mitre gauge Sanding belt Sanding disc 4" dust chuteOptional Equipment:Open stand, 26"H x 15"D x 19-1/2"W (Stock No. 708566) Closed stand (Stock No. 708598) Sanding belts and discs