The #3 Jaws for the beefy Oneway Stronghold Chuck (30589, sold separately) have the mass and size necessary for large bowls and vases. With their profiled jaws, they provide maximum gripping power with minimal damage to the piece.Chucking capacities of the Stronghold Chuck with #3 Jaws:External (compression): 3-7/8" minimum, 5-1/4" maximumInternal (expansion): 4-1/2" minimum, 6" maximumNote: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.
These silicone buttons are replacements for the stock buttons that come on the Longworth Style Chucks (49046 and 48730, sold separately). The buttons are designed to expand under pressure to hold your bowl turnings so you can make the finishing cuts to the bottom side. Soft silicone material grips tightly, but won't mar your workpiece. The kit includes eight silicone buttons plus the installation hardware.For use with the Longworth Style Chucks (49046 and 48730, sold separately).Silicone material is very pliable, giving the buttons excellent grip and durability.Includes eight buttons, plus fastening hardware.
Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles.Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:External (compression): 3/8" minimum, 2" maximumInternal (expansion): 7/8" minimum, 2-1/2" maximumChucking capacities of the Oneway Talon Chuck with #1 Jaws:External (compression): 3/8" minimum, 1-3/4" maximumInternal (expansion): 7/8" minimum, 2-3/8" maximum
When the time comes to finish off the bottom side of your bowl, this adapter helps you quickly flip and rechuck the bowl without the fussy alignment/truing process. Simply remove your Nova chuck with the bowl still mounted in it, and using the Nova Tailstock Chuck Adapter, install both onto the tailstock Live Center System (44550, sold separately). Slide the tailstock up to the headstock and rechuck the bowl onto the headstock with your preferred method (Longworth chuck, vacuum chuck, Cole jaws etc). The bowl will be perfectly centered, and ready for the finishing touches.Allows for perfect alignment when remounting work to turn the bottom side, saving you the time and material normally wasted in truing the workpiece up.Ensures the most accurate remounting of projects.Use with the Nova Live Center System (44550, sold separately) - or use alone as a dead center.In live mode, the Tailstock Chuck Adapter can be used to support work with a chuck e.g. in conjunction with vacuum chucking. #2 morse taper fits all Nova chucks and Nova lathe tailstocks.Made from medium tensile carbon K1045 steel to provide maximum structural strength.1-1/4" 8-TPI RH thread (USA, Canada, Australasia and the UK). 2 year warranty