Do you want a lathe that's as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features, this lathe meets the needs of the most demanding woodturners. Experience the 1440 lathe and see how Versatility Takes Shape.Features:Sliding headstock pivots 360° with 7 positive locking positions at 0°, 30°, 60°, 90°, 120°, 180°, and 270°Variable speed from 400-3000 RPMPositive locking tool rest with redesigned clampingOptional extension bed (54970, sold separately) takes the capacity to 60'' between centersAcme thread in tailstockImproved tailstock quill locking with anti-rotation keyEasy-to-read RPM displayBench mount designCSA Certified
Faceplates have always been regarded as a safe and secure holding method for large turnings such as bowls and platters. The only drawback is that they are a slower mounting method when compared to scroll action chucks. Now, however, you can have the best of both worlds! Nova Faceplate Rings offer the same secure holding power of a faceplate, but you can hold them with your Nova scroll chuck for the ultimate in speed and convenience. Simply screw the faceplate ring to your turning blank, then secure the ring in your chuck. The faceplate rings are available in three sizes for a wide range of workpiece sizes. The size of your faceplate ring should match the size of the jaws on your Nova chuck.Faceplate Rings fit directly into your Teknatool Chuck (matching size of jaws must be mounted on the chuck).No need to remove the chuck from your lathe as you would with traditional faceplate mounting.Fast mounting method for bowl blanks.Best alternative to Woodworm screw mounting, which is only recommended for smaller bowls.Can also be used for moderate off-center multi-axis turning.Faceplate mounting is a strong mounting method, even with irregular sized wood and rough cut surfaces.Specifications:50mm (2") faceplate ring fits 50mm jaws. Faceplate diameter is 3".100mm (4") faceplate ring fits 100mm jaws. Faceplate diameter is 5".130mm (5") faceplate ring fits 130mm jaws, Faceplate diameter is 6-1/4".
This plan is your guide to making a simple, functional and beautiful table. The design is modeled after the original farm table at which Julia Child and her husband Paul ate most of their meals. It is now on display at the Smithsonian where it so fascinated Mario Rodriguez that he created this plan for reproducing a similar version. Dispensing with typical leg-to-apron joinery, the table has shouldered brindle joints that lock the legs to a pair of long aprons to eliminate racking. Three dovetailed cross rails link the apron, along with the H-stretcher system, to make it rock solid. Follow this detailed plan to complete all the steps for turning the legs on a lathe, cutting the stopped dovetail sockets in the aprons, fitting the stretchers, assembling the undercarriage, and applying the final finish. Printed Plan Includes: Extensive full-size and scale drawingsComplete cutlistStep-by-step companion article