Whether for the novice woodturner searching for an affordable, user-friendly starter lathe, or the advanced turner adding a mini-lathe to their lineup, the new JET 1015 makes an ideal choice. With 15-1/2" between centers, and a 10" swing over the bed, this sturdy, smooth-running 15" mini-lathe has the power, precision and versatility to turn both small bowls and spindles with ease. The lathe is available in either the standard version, with six fixed spindle speeds, or in the variable speed version, with three adjustable speed ranges. When you're ready to turn your ideas into reality, the Jet 1015 mini lathe is a great place to start.Features:Six spindle speeds: 500, 840, 1240, 1800, 2630 and 3975 RPM.Integrated 24 position indexing.Improved tensioning system with easier access to belts.Wider bed ways provide increased rigidity.Live center in the tailstock.Cast iron bed construction.
Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles.Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:External (compression): 3/8" minimum, 2" maximumInternal (expansion): 7/8" minimum, 2-1/2" maximumChucking capacities of the Oneway Talon Chuck with #1 Jaws:External (compression): 3/8" minimum, 1-3/4" maximumInternal (expansion): 7/8" minimum, 2-3/8" maximum
These aluminum lathe faceplates are CNC machined for minimal runout and feature large screw holes for more workholding power. They are available in 2'' diameter (48582) and 3'' diameter (44919) sizes. The 3'' diameter faceplate includes a set screw for use on reversible lathes, but the 2'' does not have a set screw. The hubs on both are as short as possible to minimize vibration, and the thread sizes are clearly laser cut into the hubs for easy identification. 1''-8 TPI thread.
The Powermatic 3520B lathe is the third evolution of the time-honored lathe with many new and improved features. The 3520B retained all the features of the prior models such as the sliding headstock, electronic variable speed with low- and high-speed ranges and the spindle lock. The enhanced features include a digital RPM readout, built-in spindle indexing on the head stock and a redesigned tailstock with internal storage, chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has improved locking on a new profile tool rest that can accommodate an optional dust hood assembly that travels with the tool rest. Additional features include a set of dead centers to hold a spindle for visual comparison, a two-position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.Features:Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustmentsSpindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced featuresSet of dead centers which hold a spindle for visual comparisonRedesigned tool rest geometry allows for better chisel movement along the too lrestLaser-etched quill is self ejectingTwo-position mount for the optional bed extensionOptional dust assembly that travels with the toolrestBrass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centersAttached tool caddy allows convenient access to centers, wrenches, etc.Tailstock has internal storage for additional accessoriesChrome trimmed handwheels are ergonomic for a comfortable feelStandard Equipment:2HP TEFC MotorSafety shield3" face plate and face plate wrench14" tool restMultiple ball-bearing live centerBrass tipped knockout rodDrive centerSpindle lock