Whether for the novice woodturner searching for an affordable, user-friendly starter lathe, or the advanced turner adding a mini-lathe to their lineup, the new JET 1015 makes an ideal choice. With 15-1/2" between centers, and a 10" swing over the bed, this sturdy, smooth-running 15" mini-lathe has the power, precision and versatility to turn both small bowls and spindles with ease. The lathe is available in either the standard version, with six fixed spindle speeds, or in the variable speed version, with three adjustable speed ranges. When you're ready to turn your ideas into reality, the Jet 1015 mini lathe is a great place to start.Features:Variable speed with three speed ranges: 200-1050, 300-1750 and 600-3600 RPM.Integrated 24 position indexing.Improved tensioning system with easier access to belts.Wider bed ways provide increased rigidity.Live center in the tailstock.Cast iron bed construction.
Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto your lathe is a simple matter. The insert system also guarantees that you'll still be able to use your Nova chucks, even if you upgrade or change lathes later. If an insert/adapter is not available to match your lathe, you can have one threaded from a Blank Insert/Adapter (46298, sold separately). Also see our Chuck Spanner (49013, sold separately), which is useful for tightening the inserts in place. Adapts any Nova chuck to almost any lathe spindle at low cost.All insert-style Nova chucks (apart from the obsolete Compac chuck) use the same insert/adapter system to ensure maximum adaptability and flexibility for the user.Large range of inserts to fit many different popular lathe models (see below).Inserts are threaded both inside and out. Outside thread is made to fit into the Nova Chucks. The inside thread comes in a variety of sizes; the one you need will depend on what lathe you have.Note: Directly threaded chucks cannot be adapted to insert-style chucks.Nova Insert/Adapter, 1-1/4" 8-TPI - Item #: 45402 is designed for Reversible lathes
Faceplates have always been regarded as a safe and secure holding method for large turnings such as bowls and platters. The only drawback is that they are a slower mounting method when compared to scroll action chucks. Now, however, you can have the best of both worlds! Nova Faceplate Rings offer the same secure holding power of a faceplate, but you can hold them with your Nova scroll chuck for the ultimate in speed and convenience. Simply screw the faceplate ring to your turning blank, then secure the ring in your chuck. The faceplate rings are available in three sizes for a wide range of workpiece sizes. The size of your faceplate ring should match the size of the jaws on your Nova chuck.Faceplate Rings fit directly into your Teknatool Chuck (matching size of jaws must be mounted on the chuck).No need to remove the chuck from your lathe as you would with traditional faceplate mounting.Fast mounting method for bowl blanks.Best alternative to Woodworm screw mounting, which is only recommended for smaller bowls.Can also be used for moderate off-center multi-axis turning.Faceplate mounting is a strong mounting method, even with irregular sized wood and rough cut surfaces.Specifications:50mm (2") faceplate ring fits 50mm jaws. Faceplate diameter is 3".100mm (4") faceplate ring fits 100mm jaws. Faceplate diameter is 5".130mm (5") faceplate ring fits 130mm jaws, Faceplate diameter is 6-1/4".