The Jumbo Jaws for the Oneway Stronghold Chuck (30589, sold separately) consist of plates machined from solid aluminum. Their combination of slots and tapped holes accept rubber grippers for holding an infinite number of round, oval or square shapes.Chucking capacities of the Stronghold Chuck with Jumbo Jaws:External (compression): 2-3/4" minimum, 11" maximumInternal (expansion): 4-3/4" minimum, 12" maximumNote: If your lathe has less than a 16" swing, the Oneway Talon Chuck (20761) is recommended. Stronghold Chuck jaws are NOT compatible with either the original Oneway Chuck or the Talon Chuck.
Extend the spindle turning capacity of your Nova Comet II Midi Lathe! This bed extension adds 25-1/2" in length, extending the Comet II's distance between centers to 42". You can also add multiple bed extensions for even longer turnings. Solid cast iron throughout for durability and vibration-free turning.
With this package, we've taken a great lathe for pen turning and combined it with nearly everything you need to get started making pens: our popular Full-Size Carbide Turning Tool with a Square Radius Cutter, ten gold finish Slimline Pen Kits, plus the appropriate Mandrel and Drill Bit. Just purchase the pen blanks of your choice to get started in the rewarding art of pen turning! Jet JWL-1015VS Variable Speed Lathe: Whether for the novice woodturner searching for an affordable, user-friendly starter lathe, or the advanced turner adding a mini-lathe to their lineup, the new JET 1015 makes an ideal choice. With 15-1/2'' between centers, and a 10'' swing over the bed, this sturdy, smooth-running 15'' mini-lathe has the power, precision and versatility to turn both small bowls and spindles with ease. The lathe features variable, with three adjustable speed ranges so you can select the speed best suited to your project. When you're ready to turn your ideas into reality, the Jet 1015 mini lathe is a great place to start. Features: Variable speed with three speed ranges: 200-1050, 300-1750 and 600-3600 RPMIntegrated 24 position indexingImproved tensioning system with easier access to beltsWider bed ways provide increased rigidityLive center in the tailstockCast iron bed construction
All insert-style Nova chucks use an easy and inexpensive insert/adapter system that lets you mount your chuck on virtually any lathe. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto your lathe is a simple matter. The insert system also guarantees that you'll still be able to use your Nova chucks, even if you upgrade or change lathes later. If an insert/adapter is not available to match your lathe, you can have one threaded from a Blank Insert/Adapter (46298, sold separately). Also see our Chuck Spanner (49013, sold separately), which is useful for tightening the inserts in place. All insert-style Nova chucks (apart from the obsolete Compac chuck) use the same insert/adapter system to ensure maximum adaptability and flexibility for the user.Large range of inserts fit many different popular lathe models (see below). This makes it easy to bring your chucks with you when you change lathes.Inserts are threaded both inside and out. Outside thread is made to fit into the Nova Chucks. The inside thread fits onto your lathe.Note: Directly threaded chucks cannot be adapted to insert-style chucks.