Nova DVR 2024 20'' x 24'' Lathe

Turn on the Nova DVR 2024, and you'll be greeted with smooth, whisper-quiet operation, and rock steady turning. That's because its direct drive technology has no pulleys or belts to cause vibration, and its solid cast iron construction absorbs what little there is. The DVR's smart motor features intelligent Adaptive Control software that produces optimum turning conditions for your specific projects. It measures the weight of the workpiece and adjusts the performance accordingly, and instantly shuts down power to the spindle if it senses chisel dig-ins or spindle lock. An exclusive wireless remote is included to allow on/off control and speed changes from any position, and the lathe offers 10 preset speed settings to make setup nearly instantaneous. The head swivels 360° and locks at any position for outboard turning of large items.Features:2.3 HP direct-drive DVR motor offers excellent power.Incredible speed range, with a very low minimum of 100 RPM up to an incredibly high maximum of 5000 RPM, makes the Nova 2024 DVR Wood Lathe the perfect solution for a wide variety of projects from small pens to large bowls and platters.Head swivels 360° and locks at any position, with detents at 0°, 22°, 45° and 90°. High accuracy and easy swivel.All the versatility of a full swivel-head lathe with the rigidity and ruggedness of a fixed head wood lathe.Forward and reverse allows you to achieve superior finishes after turning is complete.Solid cast-iron construction throughout delivers optimum strength and rigidity while absorbing any vibration. The result: an exceptionally smooth turning experience with less time spent in the finishing process.Wireless Remote included as standard equipment. Wear it wristwatch style or attach it magnetically to the lathe bed for instant speed adjustments and on/off control.Self-ejecting tailstock center makes project set-ups faster and easier.10 presets for favorite speed settings.

$3,199.99
Buy
 

Related Products

Stainless Steel Pizza Cutter Turning Kit, Brass Finish

Stainless Steel Pizza Cutter Turning Kit, Brass Finish
$19.99

Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning. A 7/16'' drill bit is required for soft woods or a 1/2'' drill bit for hardwoods. Patent pending. Also available in a chrome finish.See our complete line of Turning Stock to complete your project. Methods to consider for installing the threaded insert are:Use the pizza cutter/bottle opener mandrel (#43469 Sold Separately) and chuck in your drill press. Tighten the two nuts on the insert so it won't spin on the bolt. After the pilot hole is drilled in the stock, clamp your stock with a handscrew or a drill press vise and manually turn the drill press chuck to drive the insert into the stock. Safety Tip: MAKE SURE DRILL PRESS IS UNPLUGGED. The drill press will keep the insert square to the stock as it is threaded in. We also recommend using beeswax, screw lube, or even soap to lubricate the threads on the insert. This process can also be done on a lathe using a three jaw chuck in the tailstock to manually feed the insert into the stock. And finally, if you're using acrylics for your handle, we have found that heating the insert before installing it makes it go in like a hot knife in butter.

Nova 10-in-1 Chuck Gauge

Nova 10-in-1 Chuck Gauge
$15.49

This tool combines all of the turner's most commonly used gauges into one efficient device. It includes a dovetail gauge, diameter gauge, center finder, dowel gauge, angle checker, dovetail marking tool, ruler, protractor and faceplate marking tool. With over 10 functions, you'll work faster and have less clutter around your lathe. Made from heavy-duty polycarbonate. Dovetail Gauge: A fast and easy way to create and check a dovetail recess. Perfect companion for your NOVA chuck.Diameter Gauge: Effortlessly determine the different diameter size of a workpiece. Ideal for cutting beads.Center Finder: Simple and accurate way of finding the center of your workpiece.Dowel Gauge: Doweling can turn dicey when the dowels don't measure up! This gauge helps.Bowl Chisel Gauge: Handy tool checks different angles for bowl chisels.Angle Checker: Checks cutting angles of chisels, knives, blades and scissors with eight commonly used angles.Also features a furniture dovetail marking tool, ruler, protractor and faceplate marking out tool.The only gauge available for Nova chuck jaw dovetail measurements.

Nova Acruline 2MT Alignment System

Nova Acruline 2MT Alignment System
$21.49

Use the Nova Acruline 2MT Alignment System to bring the centers of your Nova lathe back into perfect alignment. This is especially useful on lathes with a pivoting headstock, which should be realigned when the headstock is moved back to the inline position. The #2 morse tapers fit most brands, but check the manual for your specific lathe to find the morse taper size. 2MT alignment tool is suitable for all lathes with a #2 morse taper tailstock.Precisely machined from high-grade steel.Fits all Nova lathes.