Nova DVR 2024 20'' x 24'' Lathe with 8012 Infinity Chuck and Insert

Turn on the Nova DVR 2024, and you'll be greeted with smooth, whisper-quiet operation, and rock steady turning. That's because its direct drive technology has no pulleys or belts to cause vibration, and its solid cast iron construction absorbs what little there is. The DVR's smart motor features intelligent Adaptive Control software that produces optimum turning conditions for your specific projects. It measures the weight of the workpiece and adjusts the performance accordingly, and instantly shuts down power to the spindle if it senses chisel dig-ins or spindle lock. An exclusive wireless remote is included to allow on/off control and speed changes from any position, and the lathe offers 10 preset speed settings to make setup nearly instantaneous. The head swivels 360° and locks at any position for outboard turning of large items.Features: 2.3 HP direct-drive DVR motor offers excellent powerIncredible speed range, with a very low minimum of 100 RPM up to an incredibly high maximum of 5000 RPM, makes the Nova 2024 DVR Wood Lathe the perfect solution for a wide variety of projects from small pens to large bowls and plattersHead swivels 360° and locks at any position, with detents at 0°, 22°, 45° and 90°. High accuracy and easy swivelAll the versatility of a full swivel-head lathe with the rigidity and ruggedness of a fixed head wood latheForward and reverse allows you to achieve superior finishes after turning is completeSolid cast-iron construction throughout delivers optimum strength and rigidity while absorbing any vibration. The result: an exceptionally smooth turning experience with less time spent in the finishing processWireless Remote included as standard equipment. Wear it wristwatch style or attach it magnetically to the lathe bed for instant speed adjustments and on/off controlSelf-ejecting tailstock center makes project set-ups faster and easier10 presets for favorite speed settings

$3,495.99
Buy
 

Related Products

Powermatic 3520B Lathe 2HP, Will Operate 1Ph or 3Ph, 230V

Powermatic 3520B Lathe 2HP, Will Operate 1Ph or 3Ph, 230V
$3,999.99

The Powermatic 3520B lathe is the third evolution of the time-honored lathe with many new and improved features. The 3520B retained all the features of the prior models such as the sliding headstock, electronic variable speed with low- and high-speed ranges and the spindle lock. The enhanced features include a digital RPM readout, built-in spindle indexing on the head stock and a redesigned tailstock with internal storage, chrome-trimmed handwheels and a laser-etched, self-ejecting quill. The tool rest assembly also has improved locking on a new profile tool rest that can accommodate an optional dust hood assembly that travels with the tool rest. Additional features include a set of dead centers to hold a spindle for visual comparison, a two-position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.Features:Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustmentsSpindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced featuresSet of dead centers which hold a spindle for visual comparisonRedesigned tool rest geometry allows for better chisel movement along the too lrestLaser-etched quill is self ejectingTwo-position mount for the optional bed extensionOptional dust assembly that travels with the toolrestBrass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centersAttached tool caddy allows convenient access to centers, wrenches, etc.Tailstock has internal storage for additional accessoriesChrome trimmed handwheels are ergonomic for a comfortable feelStandard Equipment:2HP TEFC MotorSafety shield3" face plate and face plate wrench14" tool restMultiple ball-bearing live centerBrass tipped knockout rodDrive centerSpindle lock

#1 Jaws for Oneway Scroll Chuck System

#1 Jaws for Oneway Scroll Chuck System
$52.49

Install these jaws on your Oneway Scroll Chuck (22719, sold separately) or Talon Chuck (20761, sold separately) for turning small bowls, knobs, vases or spindles.Chucking capacities of the Oneway Scroll Chuck with #1 Jaws:External (compression): 3/8" minimum, 2" maximumInternal (expansion): 7/8" minimum, 2-1/2" maximumChucking capacities of the Oneway Talon Chuck with #1 Jaws:External (compression): 3/8" minimum, 1-3/4" maximumInternal (expansion): 7/8" minimum, 2-3/8" maximum

Lathe Faceplates, 1''-8 TPI

Lathe Faceplates, 1''-8 TPI
$22.99

These aluminum lathe faceplates are CNC machined for minimal runout and feature large screw holes for more workholding power. They are available in 2'' diameter (48582) and 3'' diameter (44919) sizes. The 3'' diameter faceplate includes a set screw for use on reversible lathes, but the 2'' does not have a set screw. The hubs on both are as short as possible to minimize vibration, and the thread sizes are clearly laser cut into the hubs for easy identification. 1''-8 TPI thread.