Allows you to mount a wide variety of turning blanks simply by drilling a 5/16" hole. Just mount the Woodworm Screw in your lathe and thread the blank onto the screw. The screw has a deep thread that is machined right to the end, allowing an easy lead into the wood. The depth of the thread and core size means that even larger wood blanks can be mounted. The screw has a square shank for a positive grip once in the chuck. All this adds up to a screw with a very powerful gripping action. Comes standard with most Nova chucks.Quick and easy method to mount unformed small bowl blanks.Provides a secure mounting to form the outside of bowls.The screw is 23mm (15/16") long, with blades 2mm deep, and the core size is 7mm.10.5mm thread requires a hole about 8mm (5/16") in diameter.The screw has considerable holding power and it is sometimes difficult to unscrew, so wax or oil the thread before mounting your blank.
This key ring hardware kit features gold-plated exterior trim hardware and includes all necessary hardware. Key ring fits standard 7mm mandrel shaft and uses a 7 mm drill bit. Wood blank not included.Pen Turning Mandrel System This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #2 morse taper arbor for use with #2 morse taper lathe, mandrel shaft and knurled nut. #1 morse taper arbor attaches to mandrel (#23552) for use with #1 morse taper lathe. 10mm mandrel for use with fountain and rollerball pen bushings. Bushing sets sold separately.
This is the standard live center included with all Nova lathes—use as a replacement or as an upgrade for another lathe. With heavy-duty sealed bearings, precisely machined medium tensile carbon steel construction, and a solid steel point to dig into the wood blank, the center provides a long useful life, and solid workholding capabilities. The #2 morse taper fits most brands, but check the manual for your specific lathe to find the morse taper size. 2MT Center, suitable for all lathes with a #2 morse taper tailstock.Heavy-duty sealed ball bearings for long life.Steel point for a solid bite into the turning blank.Precisely machined medium tensile carbon steel.Standard equipment on all Nova lathes.