220-Grit Sanding Belts for Work Sharp WSKTS, 6-Pack

Pack of six 220-grit ceramic oxide abrasive belts for the Work Sharp WSKTS Knife and Tool Sharpener (40323, sold separately). Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life in utility applications.

$9.99
Buy
 

Related Products

Two-Side-Tapered Hepplewhite Legs-2-3/4"W x 29" Length

Two-Side-Tapered Hepplewhite Legs-2-3/4"W x 29" Length
$54.99

An ideal choice for modern and Shaker projects alike, the Hepplewhite leg is subtly tapered for the perfect balance of lightness and solidity. 29" height is for tables.2-3/4" Width x 29" Length.

110 Volt Halogen Canister Lights-Master Lights

110 Volt Halogen Canister Lights-Master Lights
$34.99

Wire up to six lights in a series. Mounting bracket eliminates the need to drive screws through the decorative ring and allows installation in cabinet panels of different thicknesses.Plugs directly into household current without low voltage transformer. Wire up to six lights together with a master and five dependants. The master has a 10 foot cord, roller switch, conventional electrical plug and UL listed T-plug. Dependants have T-plugs on both ends of 24" long cords--an Underwriters Laboratory requirement for lights wired in series. 50 watt bulb included. Fixed beam.Mounting Bracket eliminates the need to drive screws through the decorative ring and allows installation in cabinet panels of different thickness.Top must be open to permit air circulation.4-1/2" overall height.

Maple by the Piece-3/4" Thickness

Maple by the Piece-3/4" Thickness
$8.99

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface. These thin boards are machined to 3/4" thickness, eliminating wear and tear on your planer. You won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up!Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk. Sapwood Color: White with a reddish cast.Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird's eye, maple burl, blister, leaf, and fiddleback.Texture: Very fine and even.Working properties: Due to hardness, tools must be kept very sharp.Carving: Responds well to carving tools.Steam bending properties: Fair.Strength Properties: Very high bending strength. Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.