Driver Connection Cable for Hafele Loox 2013/2015 LED Ribbon Lights

These Driver Connection Cables are compatible with the Hafele Loox 2013/2015 LED Ribbon Lights (e.g. 48238, sold separately). Use them to connect additional lights to the driver, or to connect cutoffs from your roll of ribbon lights.

$3.99
Buy
 

Related Products

Black Decorative 20'' Lighting Strip

Black Decorative 20'' Lighting Strip
$59.99

A soft accent for cabinets and shelves.A soft accent for cabinets and shelves.Includes self-adhesive pads for straight mounting or swiveling clips for angled mounting. Mounting brackets swivel. Also includes cord, roll switch and a permanent bulb strip that lasts approximately 40,000 hours.

One of a Kind Hemlock Slab - 60'' L x 17'' W x 2'' Thickness

One of a Kind Hemlock Slab - 60'' L x 17'' W x 2'' Thickness
$249.99

Each of these unique slabs is individually cut to reveal the most interesting grain and to preserve as much of the natural live edge as possible - use them for table tops, clock faces, signs, decorative wall hangings and whatever else your imagination can drum up. Live edge slabs reveal the individual character of the tree from which they were cut, and provide woodworkers with beautiful wide boards that would otherwise be ripped thin if milled for yield. Because of their width, most of these slabs won't fit through a jointer or planer. Instead, they are carefully flattened on a custom-built, manually-operated mill. The slabs are then sanded to 150-grit and given a light of coat of clear shellac for protection. All of these slabs are sourced from small family-owned mills that practice responsible land management. For dimensions refer to the grid in the photo: each red square represents 12''; each black square represents 4'' When necessary, checking and defects are carefully patched at the mill Sanded to 150-grit and coated with shellac for protection

Cherry by the Piece-1/4" Thickness

Cherry by the Piece-1/4" Thickness
$4.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.