Hafele Bali Surface Mounted Warm LED Light with Touch Control-Warm Touch-Control LED Lights

Ideal for use on the inside or underside of cabinets, these surface-mounting aluminumLED fixtures deliver high intensity output and a warm 3200K color. Touch control featureallows you to turn your lights on and off with a simple touch instead of from a remoteswitch. A built-in diffuser distributes light evenly and minimizes glare. Depending onlength, Bali fixtures range from 1.65 to 6.6 watts. Each includes a 118" connector cablewhich plugs into the required Transformer(36750), sold separately. Allow 2 weeks for delivery.Bali Warm LED Lights without the Touch Control option also available.

$0.00
Buy
 

Related Products

Rocker Switches for Xenon and LED Lighting

Rocker Switches for Xenon and LED Lighting
$9.99

These rocker switches are for Xenon and LED lighting applications. The switch is installed on the 12V side and includes male and female connectors to make assembly easy, typically requiring no cutting or splicing. Recommended for applications up to 60W. Switches are compatible with the following lighting solutions:Tresco Pockit LED Lights Stellar Arch LightsTechnical Details:Switches will add approximately 12" of cord between the transformer and connecting block or connecting block and light.Also includes a 72" long cord that installs between the switch and connecting blockSwitch requires a 13/16" diameter hole for installation

Cherry by the Piece-3/4" Thickness

Cherry by the Piece-3/4" Thickness
$9.99

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8", 1/4", 1/2" and 3/4" thicknesses, relieving your planer of excess work. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up!Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years. Full height is attained in about 100 years.Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance.Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.Luster: Rich and satiny. Odor: Emits a fruity aroma when cut.Steam Bending: Good. Often compared to Beech and Ash.

Double-Sided Sanding Sponges, 6-Pack

Double-Sided Sanding Sponges, 6-Pack
$5.99

A terrific value at almost half the price of 6 individual sponges! Each sponge features medium grit on one face and edge, while the opposite face and edge has fine grit. Flexible core conforms nicely to turnings, moldings and other non-flat surfaces. They also work well on flat surfaces, especially between coats of finish, where a harder block would sand through the finish. Ideal for light to moderate sanding of wood, paint, metal, plastic and drywall.